May 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue May 1 01:13:56 CEST 2012
Ending: Thu May 31 23:09:52 CEST 2012
Messages: 1683

• [libav-devel] [PATCH] Fix compilation with YASM/NASM without AVX support.   Kieran Kunhya
• [libav-devel] [PATCH] Fix compilation with YASM/NASM without AVX support.   Ronald S. Bultje
• [libav-devel] [PATCH] snowdsp: explicitely state instruction size.   Ronald S. Bultje
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Ronald S. Bultje
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Måns Rullgård
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Ronald S. Bultje
• [libav-devel] [PATCH] vp8: update frame size changes on thread context switches.   Ronald S. Bultje
• [libav-devel] [PATCH] twinvq: fix out of bounds array access   Mans Rullgard
• [libav-devel] [PATCH] twinvq: fix out of bounds array access   Ronald S. Bultje
• [libav-devel] [PATCH 1/3] lavr: add C functions for mixing 2 to 1 channels with s16p format   Justin Ruggles
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Justin Ruggles
• [libav-devel] [PATCH 3/3] lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs   Justin Ruggles
• [libav-devel] [PATCH] twinvq: fix out of bounds array access   Vitor Sessak
• [libav-devel] [PATCH] snowdsp: explicitely state instruction size.   Kostya Shishkov
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Luca Barbato
• [libav-devel] [PATCH 1/3] lavr: add C functions for mixing 2 to 1 channels with s16p format   Alex Converse
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Måns Rullgård
• [libav-devel] [PATCH] wmall: fix reconstructing audio with uncoded channels   Kostya Shishkov
• [libav-devel] [PATCH] wmall: fix reconstructing audio with uncoded channels   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Luca Barbato
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] configure: remove malloc_aligned.   Måns Rullgård
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Luca Barbato
• [libav-devel] [PATCH 1/6] lavr: Add x86-optimized function for s16 to s32 conversion   Justin Ruggles
• [libav-devel] [PATCH 2/6] lavr: Add x86-optimized functions for s16 to flt conversion   Justin Ruggles
• [libav-devel] [PATCH 3/6] lavr: Add x86-optimized functions for s32 to s16 conversion   Justin Ruggles
• [libav-devel] [PATCH 4/6] lavr: Add x86-optimized functions for s32 to flt conversion   Justin Ruggles
• [libav-devel] [PATCH 5/6] lavr: Add x86-optimized function for flt to s16 conversion   Justin Ruggles
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Justin Ruggles
• [libav-devel] [PATCH 2/6] lavr: Add x86-optimized functions for s16 to flt conversion   Jason Garrett-Glaser
• [libav-devel] [PATCH] WMAL: Fix reconstruction of audio with uncoded channel(s)   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH] WMAL: Fix reconstruction of audio with uncoded channel(s)   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH 2/6] lavr: Add x86-optimized functions for s16 to flt conversion   Ronald S. Bultje
• [libav-devel] [PATCH 1/6] lavr: Add x86-optimized function for s16 to s32 conversion   Christophe Gisquet
• [libav-devel] [PATCH 1/6] lavr: Add x86-optimized function for s16 to s32 conversion   Jason Garrett-Glaser
• [libav-devel] [PATCH 1/6] lavr: Add x86-optimized function for s16 to s32 conversion   Christophe Gisquet
• [libav-devel] [PATCH] vp8: update frame size changes on thread context switches.   Luca Barbato
• [libav-devel] [PATCH 12/14 v3] mlpdec: Fix MLP channel ordering   Derek Buitenhuis
• [libav-devel] [PATCH 12/14 v2] mlpdec: Fix MLP channel ordering   Derek Buitenhuis
• [libav-devel] [PATCH] gitignore: add Win32 library suffixes   Derek Buitenhuis
• [libav-devel] [PATCH] gitignore: add Win32 library suffixes   Luca Barbato
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH 04/14] avcodec: add YCgCo color space.   Tomas Härdin
• [libav-devel] [PATCH] arm: intreadwrite: fix inline asm constraints for gcc 4.6 and later   Mans Rullgard
• [libav-devel] [PATCH] arm: intreadwrite: fix inline asm constraints for gcc 4.6 and later   Kostya Shishkov
• [libav-devel] [PATCH] snowdsp: explicitely state instruction size.   Diego Biurrun
• [libav-devel] [PATCH] WMAL: Do not start decoding if frame does not end in current packet   Diego Biurrun
• [libav-devel] [PATCH] arm: intreadwrite: disable inline asm for gcc 4.7 and later   Mans Rullgard
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Luca Barbato
• [libav-devel] [PATCH] arm: intreadwrite: disable inline asm for gcc 4.7 and later   Luca Barbato
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] WMAL Cosmetics: Fix indentation   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH 2/6] lavr: Add x86-optimized functions for s16 to flt conversion   Justin Ruggles
• [libav-devel] [PATCH 12/14 v3] mlpdec: Fix MLP channel ordering   Justin Ruggles
• [libav-devel] [PATCH] WMAL Cosmetics: Fix indentation   Kostya Shishkov
• [libav-devel] [PATCH] wmall: fix reconstructing audio with uncoded channels   Kostya Shishkov
• [libav-devel] [PATCH] qdm2: clip array indices returned by qdm2_get_vlc().   Ronald S. Bultje
• [libav-devel] [PATCH 04/14] avcodec: add YCgCo color space.   Derek Buitenhuis
• [libav-devel] [PATCH 04/14] avcodec: add YCgCo color space.   Hendrik Leppkes
• [libav-devel] [PATCH] png: check bit depth for PAL8/Y400A pixel formats.   Ronald S. Bultje
• [libav-devel] [PATCH] ea: check chunk_size for validity.   Ronald S. Bultje
• [libav-devel] [PATCH] ea: check chunk_size for validity.   Martin Storsjö
• [libav-devel] [PATCH] png: check bit depth for PAL8/Y400A pixel formats.   Martin Storsjö
• [libav-devel] [PATCH] ea: check chunk_size for validity.   Kostya Shishkov
• [libav-devel] OpenSSH 6.0 bug report   Sean McGovern
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Vitor Sessak
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Justin Ruggles
• [libav-devel] [PATCH] motionpixels: Clip YUV values after applying a gradient.   Alex Converse
• [libav-devel] [PATCH] motionpixels: Clip YUV values after applying a gradient.   Ronald S. Bultje
• [libav-devel] OpenSSH 6.0 bug report   Måns Rullgård
• [libav-devel] [PATCH 04/14] avcodec: add YCgCo color space.   Luca Barbato
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Vitor Sessak
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Justin Ruggles
• [libav-devel] [PATCH] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Alex Converse
• [libav-devel] [PATCH 13/14] mpeg12: fixed parsing in some mpeg2 streams   Ronald S. Bultje
• [libav-devel] [PATCH 07/14] Add SMPTE240M transfer characteristics flag.   Ronald S. Bultje
• [libav-devel] [PATCH 05/14] mpegts: Some additional HDMV types and reg descriptors for mpegts   Ronald S. Bultje
• [libav-devel] [PATCH 07/14] Add SMPTE240M transfer characteristics flag.   Luca Barbato
• [libav-devel] [PATCH] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Vladimir Pantelic
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH] vqavideo: return error if image size is not a multiple of block size   Mans Rullgard
• [libav-devel] [PATCH] vqavideo: return error if image size is not a multiple of block size   Kostya Shishkov
• [libav-devel] [PATCH 07/14] Add SMPTE240M transfer characteristics flag.   Derek Buitenhuis
• [libav-devel] [PATCH] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] (no subject)   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH] WMAL: Restore removed code in mclms_predict()   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH] Shift output samples by specified number of padding zeroes.   Jakub Stachowski
• [libav-devel] [PATCH] WMAL: Restore removed code in mclms_predict()   Kostya Shishkov
• [libav-devel] [PATCH] Shift output samples by specified number of padding zeroes.   Kostya Shishkov
• [libav-devel] [PATCH 1/3] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH 2/3] avprobe: allow showing only one container/stream property.   Ronald S. Bultje
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Ronald S. Bultje
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Ronald S. Bultje
• [libav-devel] [PATCH 1/4] vsrc_buffer: return EAGAIN if no frame is available.   Anton Khirnov
• [libav-devel] [PATCH 2/4] vf_split: support user-specifiable number of outputs.   Anton Khirnov
• [libav-devel] [PATCH 3/4] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] [PATCH 4/4] lavfi: add vsink_buffer, and use it in avtools   Anton Khirnov
• [libav-devel] [PATCH] arm: intreadwrite: revert 16-bit load asm to old version for gcc < 4.6   Mans Rullgard
• [libav-devel] [PATCH 2/3] avprobe: allow showing only one container/stream property.   Anton Khirnov
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Alex Converse
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Ronald S. Bultje
• [libav-devel] [PATCH] avprobe: allow showing only one container/stream property.   Ronald S. Bultje
• [libav-devel] [PATCH] arm: intreadwrite: revert 16-bit load asm to old version for gcc < 4.6   Kostya Shishkov
• [libav-devel] [PATCH 1/4] vsrc_buffer: return EAGAIN if no frame is available.   Luca Barbato
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Måns Rullgård
• [libav-devel] [PATCH 6/6] lavr: Add x86-optimized function for flt to s32 conversion   Vitor Sessak
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Måns Rullgård
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Luca Barbato
• [libav-devel] [PATCH 3/4] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Luca Barbato
• [libav-devel] [PATCH 4/4] lavfi: add vsink_buffer, and use it in avtools   Luca Barbato
• [libav-devel] [PATCH] avplay: properly close/reopen AVAudioResampleContext on channel layout change   Justin Ruggles
• [libav-devel] [PATCH 1/3] fate: Add oneline comparison method   Alex Converse
• [libav-devel] [PATCH 2/3] avprobe: allow showing only one container/stream property.   Alex Converse
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Alex Converse
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Dale Curtis
• [libav-devel] [PATCH] avplay: properly close/reopen AVAudioResampleContext on channel layout change   Alex Converse
• [libav-devel] [PATCH 1/3] fate: Add oneline comparison method   Måns Rullgård
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Måns Rullgård
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Luca Barbato
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Dale Curtis
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Luca Barbato
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Justin Ruggles
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Dale Curtis
• [libav-devel] [PATCH 1/3] fate: Add oneline comparison method   Alex Converse
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Alex Converse
• [libav-devel] [PATCH 3/3] Add probe fate tests to test for regressions in detecting media types.   Måns Rullgård
• [libav-devel] [PATCH 1/3] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH] Add probe fate tests to test for regressions in detecting media types.   Alex Converse
• [libav-devel] ogg: Seek on video stream sometimes results decreased timestamps.   Dale Curtis
• [libav-devel] [PATCH] Add probe fate tests to test for regressions in detecting media types.   Måns Rullgård
• [libav-devel] [PATCH] test programs: don't ignore the return value of fwrite()   Sean McGovern
• [libav-devel] [PATCH] configure: add POWER[5-7] support   Sean McGovern
• [libav-devel] [PATCH] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] [PATCH] avprobe: allow showing only one container/stream property.   Anton Khirnov
• [libav-devel] [PATCH] configure: add POWER[5-7] support   Måns Rullgård
• [libav-devel] [PATCH] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Måns Rullgård
• [libav-devel] [PATCH] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] [PATCH 3/3] aacps: NEON optimisations   Måns Rullgård
• [libav-devel] [PATCH] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Måns Rullgård
• [libav-devel] [PATCH] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] VideoLAN Dev Days 2012   Jean-Baptiste Kempf
• [libav-devel] [PATCH] configure: add POWER[5-7] support   Sean McGovern
• [libav-devel] [PATCH] configure: add POWER[5-7] support   Måns Rullgård
• [libav-devel] [dvblast-devel] VideoLAN Dev Days 2012   Jean-Paul Saman
• [libav-devel] [vlc-devel] [dvblast-devel] VideoLAN Dev Days 2012   Rémi Denis-Courmont
• [libav-devel] NEON: performance comparison of fixed-point and float FFT   Orjan Friberg
• [libav-devel] NEON: performance comparison of fixed-point and float FFT   Måns Rullgård
• [libav-devel] NEON: performance comparison of fixed-point and float FFT   Orjan Friberg
• [libav-devel] VideoLAN Dev Days 2012   Diego Biurrun
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Kostya Shishkov
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Måns Rullgård
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Måns Rullgård
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Måns Rullgård
• [libav-devel] [PATCH] rtsp: Add content-type message header parsing   Jordi Ortiz
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Kostya Shishkov
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Diego Biurrun
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if there is previous frame   Diego Biurrun
• [libav-devel] [PATCH] rtsp: Add content-type message header parsing   Luca Barbato
• [libav-devel] [PATCH 1/2] tests: Mark some file-internal symbols as static.   Diego Biurrun
• [libav-devel] [PATCH 2/2] tests: Refactor rotozoom/videogen common code into a separate file.   Diego Biurrun
• [libav-devel] [PATCH] test programs: don't ignore the return value of fwrite()   Diego Biurrun
• [libav-devel] [PATCH v2] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH 3/3] aacps: NEON optimisations   Luca Barbato
• [libav-devel] [PATCH 1/2] tests: Mark some file-internal symbols as static.   Måns Rullgård
• [libav-devel] [PATCH v2] zerocodec: check if there is previous frame   Kostya Shishkov
• [libav-devel] [PATCH 2/2] tests: Refactor rotozoom/videogen common code into a separate file.   Måns Rullgård
• [libav-devel] [PATCH v2] zerocodec: check if there is previous frame   Diego Biurrun
• [libav-devel] [PATCH v2] zerocodec: check if there is previous frame   Derek Buitenhuis
• [libav-devel] [PATCH v2] zerocodec: check if there is previous frame   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH] test programs: don't ignore the return value of fwrite()   Sean McGovern
• [libav-devel] [PATCH] doc: clarify check for NULL pointer style   Luca Barbato
• [libav-devel] [PATCH] celp filters: Do not read earlier than the start of the 'out' vector.   Alex Converse
• [libav-devel] [PATCH] doc: clarify check for NULL pointer style   Derek Buitenhuis
• [libav-devel] [PATCH] celp filters: Do not read earlier than the start of the 'out' vector.   Luca Barbato
• [libav-devel] [PATCH] zerocodec: check if the previous frame is missing   Luca Barbato
• [libav-devel] [PATCH] celp filters: Do not read earlier than the start of the 'out' vector.   Måns Rullgård
• [libav-devel] [PATCH] doc: clarify check for NULL pointer style   Luca Barbato
• [libav-devel] [PATCH] avprobe: allow showing only one container/stream property.   Alex Converse
• [libav-devel] [PATCH] configure: add POWER[5-7] support   Sean McGovern
• [libav-devel] [libav-commits] rv34: set mb_num_left to 0 after finishing a frame   Reinhard Tartler
• [libav-devel] [libav-commits] rv34: set mb_num_left to 0 after finishing a frame   Ronald S. Bultje
• [libav-devel] [PATCH 1/2] rtpdec_h264: Add input size checks   Martin Storsjö
• [libav-devel] [PATCH 2/2] rtpdec_h264: Check the available data length before reading   Martin Storsjö
• [libav-devel] [PATCH 1/2] rtpdec_h264: Add input size checks   Luca Barbato
• [libav-devel] [PATCH 1/2] rtpdec_h264: Add input size checks   Martin Storsjö
• [libav-devel] [libav-commits] aacsbr: Add a debug check to sbr_mapping.   Alex Converse
• [libav-devel] [PATCH 1/2] rtpdec_h264: Add input size checks   Luca Barbato
• [libav-devel] [PATCH 01/11] rtpdec_h264: Return proper error codes   Martin Storsjö
• [libav-devel] [PATCH 02/11] rtpdec_h264: Remove useless memory corruption checks   Martin Storsjö
• [libav-devel] [PATCH 03/11] rtpdec_h264: Remove outdated/useless/incorrect comments   Martin Storsjö
• [libav-devel] [PATCH 04/11] rtpdec_h264: Remove a useless ifdef   Martin Storsjö
• [libav-devel] [PATCH 05/11] rtpdec_h264: Convert commented out code into setting an unused variable   Martin Storsjö
• [libav-devel] [PATCH 06/11] rtpdec_h264: Clean up comments   Martin Storsjö
• [libav-devel] [PATCH 07/11] rtpdec_h264: Cosmetic cleanup   Martin Storsjö
• [libav-devel] [PATCH 08/11] rtpdec_h264: Cleanup debug packet type counting   Martin Storsjö
• [libav-devel] [PATCH 09/11] rtpdec_h264: Make start_sequence a static const array   Martin Storsjö
• [libav-devel] [PATCH 10/11] rtpdec_h264: Replace sizeof(start_sequence) with a macro   Martin Storsjö
• [libav-devel] [PATCH 11/11] rtpdec_h264: Reorder code blocks   Martin Storsjö
• [libav-devel] [PATCH 06/11] rtpdec_h264: Clean up comments   Alex Converse
• [libav-devel] [PATCH 06/11] rtpdec_h264: Clean up comments   Martin Storsjö
• [libav-devel] [PATCH] qdm2: clip array indices returned by qdm2_get_vlc().   Ronald S. Bultje
• [libav-devel] [PATCH 01/11] rtpdec_h264: Return proper error codes   Luca Barbato
• [libav-devel] [PATCH 02/11] rtpdec_h264: Remove useless memory corruption checks   Luca Barbato
• [libav-devel] [PATCH 03/11] rtpdec_h264: Remove outdated/useless/incorrect comments   Luca Barbato
• [libav-devel] [PATCH 04/11] rtpdec_h264: Remove a useless ifdef   Luca Barbato
• [libav-devel] [PATCH 07/11] rtpdec_h264: Cosmetic cleanup   Luca Barbato
• [libav-devel] [PATCH 08/11] rtpdec_h264: Cleanup debug packet type counting   Luca Barbato
• [libav-devel] [PATCH 09/11] rtpdec_h264: Make start_sequence a static const array   Luca Barbato
• [libav-devel] [PATCH 10/11] rtpdec_h264: Replace sizeof(start_sequence) with a macro   Luca Barbato
• [libav-devel] [PATCH 11/11] rtpdec_h264: Reorder code blocks   Luca Barbato
• [libav-devel] [PATCH 2/2] rtpdec_h264: Check the available data length before reading   Luca Barbato
• [libav-devel] [PATCH 2/2] rtpdec_h264: Check the available data length before reading   Martin Storsjö
• [libav-devel] [PATCH 04/11] rtpdec_h264: Remove a useless ifdef   Martin Storsjö
• [libav-devel] [PATCH] WMAL: Restore removed code in mclms_predict()   Mashiat Sarker Shakkhar
• [libav-devel] [libav-commits] rv34: set mb_num_left to 0 after finishing a frame   Reinhard Tartler
• [libav-devel] [PATCH] WMAL: Restore removed code in mclms_predict()   Kostya Shishkov
• [libav-devel] [PATCH 1/7] rtpdec_h264: Convert commented out code into setting an unused variable   Martin Storsjö
• [libav-devel] [PATCH 2/7] rtpdec_h264: Clean up comments   Martin Storsjö
• [libav-devel] [PATCH 3/7] rtpdec_h264: Cosmetic cleanup   Martin Storsjö
• [libav-devel] [PATCH 4/7] rtpdec_h264: Cleanup debug packet type counting   Martin Storsjö
• [libav-devel] [PATCH 5/7] rtpdec_h264: Make start_sequence a static const array   Martin Storsjö
• [libav-devel] [PATCH 6/7] rtpdec_h264: Replace sizeof(start_sequence) with a macro   Martin Storsjö
• [libav-devel] [PATCH 7/7] rtpdec_h264: Reorder code blocks   Martin Storsjö
• [libav-devel] [PATCH 1/4] dfa: add some checks to ensure that decoder won't write past frame end   Kostya Shishkov
• [libav-devel] [PATCH 2/4] lagarith: make offset array type unsigned   Kostya Shishkov
• [libav-devel] [PATCH 3/4] eatgv: check motion vectors   Kostya Shishkov
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Michael Niedermayer
• [libav-devel] [PATCH 3/7] rtpdec_h264: Cosmetic cleanup   Diego Biurrun
• [libav-devel] [PATCH 3/7] rtpdec_h264: Cosmetic cleanup   Martin Storsjö
• [libav-devel] [PATCH 2/7] rtpdec_h264: Clean up comments   Diego Biurrun
• [libav-devel] [PATCH 2/4] lagarith: make offset array type unsigned   Nathan Caldwell
• [libav-devel] [PATCH] tests: Refactor rotozoom/videogen common code into a separate file.   Diego Biurrun
• [libav-devel] [PATCH] rtpdec_h264: cosmetic cleanup   Diego Biurrun
• [libav-devel] [PATCH 5/7] rtpdec_h264: Make start_sequence a static const array   Diego Biurrun
• [libav-devel] [PATCH 4/7] rtpdec_h264: Cleanup debug packet type counting   Diego Biurrun
• [libav-devel] [PATCH 7/7] rtpdec_h264: Reorder code blocks   Diego Biurrun
• [libav-devel] [PATCH 6/7] rtpdec_h264: Replace sizeof(start_sequence) with a macro   Diego Biurrun
• [libav-devel] [PATCH] tests: Refactor rotozoom/videogen common code into a separate file.   Måns Rullgård
• [libav-devel] [PATCH] rtpdec_h264: cosmetic cleanup   Martin Storsjö
• [libav-devel] [PATCH] test programs: don't ignore the return value of fwrite()   Diego Biurrun
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Derek Buitenhuis
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Kostya Shishkov
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH 1/7] rtpdec_h264: Convert commented out code into setting an unused variable   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Samuel Pitoiset
• [libav-devel] [PATCH 6/7] rtpdec_h264: Replace sizeof(start_sequence) with a macro   Martin Storsjö
• [libav-devel] [PATCH 1/2] rtpdec_h264: Free old extradata before clearing the pointer   Martin Storsjö
• [libav-devel] [PATCH 2/2] rtpdec_h264: Add missing newlines to av_log calls   Martin Storsjö
• [libav-devel] [PATCH 1/4] dfa: add some checks to ensure that decoder won't write past frame end   Luca Barbato
• [libav-devel] [PATCH 3/4] eatgv: check motion vectors   Luca Barbato
• [libav-devel] [PATCH 1/2] rtpdec_h264: Free old extradata before clearing the pointer   Luca Barbato
• [libav-devel] [PATCH 2/2] rtpdec_h264: Add missing newlines to av_log calls   Luca Barbato
• [libav-devel] video september in paris (Re: [foms] VideoLAN Dev Days 2012   Holger Levsen
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Mans Rullgard
• [libav-devel] [PATCH 2/2] mips: intreadwrite: fix inline asm for gcc 4.8   Mans Rullgard
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Derek Buitenhuis
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Derek Buitenhuis
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Måns Rullgård
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Derek Buitenhuis
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Måns Rullgård
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Derek Buitenhuis
• [libav-devel] [PATCH] zerocodec: check if the previous frame is missing   Derek Buitenhuis
• [libav-devel] [PATCH 1/4] dfa: add some checks to ensure that decoder won't write past frame end   Kostya Shishkov
• [libav-devel] [PATCH] dfa: use more meaningful return codes   Kostya Shishkov
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Kostya Shishkov
• [libav-devel] [PATCH 3/4] eatgv: check motion vectors   Kostya Shishkov
• [libav-devel] [PATCH 1/8] lavc: add sample rate and channel layout to AVFrame.   Anton Khirnov
• [libav-devel] [PATCH 2/8] avconv: remove stray useless comment.   Anton Khirnov
• [libav-devel] [PATCH 3/8] lavfi: avfilter_merge_formats: handle case where inputs are same   Anton Khirnov
• [libav-devel] [PATCH 4/8] vf_split: support user-specifiable number of outputs.   Anton Khirnov
• [libav-devel] [PATCH 5/8] lavfi: always enable the scale filter and depend on sws.   Anton Khirnov
• [libav-devel] [PATCH 6/8] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] [PATCH 7/8] lavfi: support audio in avfilter_copy_frame_props().   Anton Khirnov
• [libav-devel] [PATCH 8/8] lavfi: remove avfilter_default_config_input_link() declaration   Anton Khirnov
• [libav-devel] [PATCH] lavfi/formats: use sizeof(var) instead of sizeof(type).   Anton Khirnov
• [libav-devel] [PATCH] lavfi: support audio in avfilter_copy_frame_props().   Anton Khirnov
• [libav-devel] [PATCH 1/2] mips: intreadwrite: remove unnecessary inline asm   Måns Rullgård
• [libav-devel] [PATCH] dfa: use more meaningful return codes   Luca Barbato
• [libav-devel] [PATCH 4/8] vf_split: support user-specifiable number of outputs.   Luca Barbato
• [libav-devel] [PATCH 5/8] lavfi: always enable the scale filter and depend on sws.   Luca Barbato
• [libav-devel] [PATCH 2/8] avconv: remove stray useless comment.   Luca Barbato
• [libav-devel] [PATCH] lavfi: support audio in avfilter_copy_frame_props().   Luca Barbato
• [libav-devel] [PATCH 8/8] lavfi: remove avfilter_default_config_input_link() declaration   Luca Barbato
• [libav-devel] [PATCH 6/8] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Luca Barbato
• [libav-devel] [PATCH 1/8] lavc: add sample rate and channel layout to AVFrame.   Luca Barbato
• [libav-devel] [PATCH 3/8] lavfi: avfilter_merge_formats: handle case where inputs are same   Diego Biurrun
• [libav-devel] [PATCH 5/8] lavfi: always enable the scale filter and depend on sws.   Diego Biurrun
• [libav-devel] [PATCH] lavfi/formats: use sizeof(var) instead of sizeof(type).   Diego Biurrun
• [libav-devel] [PATCH] Mark a number of variables only used in av_dlog() calls as av_unused.   Kostya Shishkov
• [libav-devel] [PATCH 06/12] dvdec: drop const qualifier from variable to eliminate a warning   Kostya Shishkov
• [libav-devel] [PATCH] pthread: warn on high thread counts   Diego Biurrun
• [libav-devel] [PATCH] vf_yadif: fix missing error handling for avfilter_poll_frame()   Diego Biurrun
• [libav-devel] [PATCH] vf_yadif: fix missing error handling for avfilter_poll_frame()   Diego Biurrun
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Derek Buitenhuis
• [libav-devel] [PATCH 4/4] eatgv: check vector_bits   Kostya Shishkov
• [libav-devel] [PATCH 2/4] Move code shared between libdirac and libschroedinger to libschroedinger.   Jordi Ortiz
• [libav-devel] [PATCH 3/4] libschroedinger: Move a function to avoid a forward declaration.   Jordi Ortiz
• [libav-devel] [PATCH 4/4] libschroedinger: Switch to function names more in line with Libav style.   Jordi Ortiz
• [libav-devel] fps filter   Robert Nagy
• [libav-devel] [PATCH] pthread: warn on high thread counts   Ronald S. Bultje
• [libav-devel] [PATCH] zerocodec: check if the previous frame is missing   Luca Barbato
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH 2/4] Move code shared between libdirac and?libschroedinger to libschroedinger.   Diego Biurrun
• [libav-devel] [PATCH] zerocodec: check if the previous frame is missing   Derek Buitenhuis
• [libav-devel] [PATCH] lavfi: uninline avfilter_copy_buffer_ref_props().   Anton Khirnov
• [libav-devel] [PATCH] yadif: Improve pts calculations.   Robert Nagy
• [libav-devel] [PATCH 2/5] dv: Split profile handling code into a separate file.   Diego Biurrun
• [libav-devel] [PATCH] libxvid: Separate libxvid encoder from libxvid rate control code.   Diego Biurrun
• [libav-devel] [PATCH 2/4] Move code shared between libdirac and?libschroedinger to libschroedinger.   Jordi Ortiz
• [libav-devel] [PATCH 1/4] build: cosmetics: Split HEADERS/OBJS/PROGS lists into one entry per line.   Diego Biurrun
• [libav-devel] [PATCH 2/4] build: cosmetics: Align all backslashes on column 72.   Diego Biurrun
• [libav-devel] [PATCH 3/4] build: cosmetics: Add missing end-of-line backslashes from item lists.   Diego Biurrun
• [libav-devel] [PATCH 4/4] build: cosmetics: Reorder some entries for improved consistency.   Diego Biurrun
• [libav-devel] [PATCH 2/4] Move code shared between libdirac and?libschroedinger to libschroedinger.   Diego Biurrun
• [libav-devel] [PATCH] lavf: add missing '*' in a doxy.   Anton Khirnov
• [libav-devel] [PATCH 04/12] cmdutils: Add fallback case to switch in check_stream_specifier().   Diego Biurrun
• [libav-devel] [PATCH 05/12] av_samples_fill_array: Mark unmodified function argument as const.   Diego Biurrun
• [libav-devel] [PATCH 08/12] mmvideo.c: Remove unused variable in mm_decode_pal().   Diego Biurrun
• [libav-devel] [PATCH 10/12] mov: Remove write-only variable in mov_read_chan().   Diego Biurrun
• [libav-devel] [PATCH 11/12] txd: Remove write-only variable in txd_decode_frame().   Diego Biurrun
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Diego Biurrun
• [libav-devel] [PATCH 08/12] mmvideo.c: Remove unused variable in mm_decode_pal().   Kostya Shishkov
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Kostya Shishkov
• [libav-devel] [PATCH 11/12] txd: Remove write-only variable in txd_decode_frame().   Kostya Shishkov
• [libav-devel] [PATCH] lavf: add missing '*' in a doxy.   Diego Biurrun
• [libav-devel] [PATCH] qdm2: clip array indices returned by qdm2_get_vlc().   Benjamin Larsson
• [libav-devel] [PATCH] lavfi: uninline avfilter_copy_buffer_ref_props().   Måns Rullgård
• [libav-devel] [PATCH 3/4] build: cosmetics: Add missing end-of-line backslashes from item lists.   Måns Rullgård
• [libav-devel] [PATCH 4/4] build: cosmetics: Reorder some entries for improved consistency.   Måns Rullgård
• [libav-devel] [PATCH 1/4] build: cosmetics: Split HEADERS/OBJS/PROGS lists into one entry per line.   Måns Rullgård
• [libav-devel] [PATCH 2/4] Move code shared between libdirac and?libschroedinger to libschroedinger.   Jordi Ortiz
• [libav-devel] [PATCH 1/2] h264: Remove a commented-out function pointer declaration.   Diego Biurrun
• [libav-devel] [PATCH 1/2] h264: Remove a commented-out function pointer declaration.   Måns Rullgård
• [libav-devel] [PATCH 1/2] h264: K&R formatting cosmetics for header files (part I/II)   Diego Biurrun
• [libav-devel] [PATCH 2/2] h264: K&R formatting cosmetics for header files (part II/II)   Diego Biurrun
• [libav-devel] [PATCH 1/2] h264: Remove a commented-out function pointer declaration.   Diego Biurrun
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Vitor Sessak
• [libav-devel] [PATCH] lavc: pad last audio frame with silence when needed.   Anton Khirnov
• [libav-devel] [PATCH 1/2] h264: K&R formatting cosmetics for header files (part I/II)   Clément Bœsch
• [libav-devel] [PATCH] lavc: pad last audio frame with silence when needed.   Anton Khirnov
• [libav-devel] [PATCH 1/2] h264: K&R formatting cosmetics for header files (part I/II)   Diego Biurrun
• [libav-devel] [PATCH 1/2] h264: K&R formatting cosmetics for header files (part I/II)   Kostya Shishkov
• [libav-devel] [PATCH] lavc: pad last audio frame with silence when needed.   Justin Ruggles
• [libav-devel] [PATCH] flvenc: use AVFormatContext, not AVCodecContext for logging.   Anton Khirnov
• [libav-devel] [RFC] lockmgr callback inclusion into libs sources   Andrey Utkin
• [libav-devel] [PATCH] flvenc: use AVFormatContext, not AVCodecContext for logging.   Justin Ruggles
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH 05/12] av_samples_fill_array: Mark unmodified function argument as const.   Justin Ruggles
• [libav-devel] [PATCH 10/12] mov: Remove write-only variable in mov_read_chan().   Justin Ruggles
• [libav-devel] [RFC] lockmgr callback inclusion into libs sources   Luca Barbato
• [libav-devel] [PATCH 2/4] avcodec: refactor avcodec_encode_audio2() to merge common branches   Anton Khirnov
• [libav-devel] [PATCH 1/2] lavc: pad last audio frame with silence when needed.   Anton Khirnov
• [libav-devel] [PATCH 2/2] lavc: check that extended_data is properly set in avcodec_encode_audio2().   Anton Khirnov
• [libav-devel] [RFC] lockmgr callback inclusion into libs sources   Andrey Utkin
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Vitor Sessak
• [libav-devel] [PATCH 1/3] fate: Add oneline comparison method   Alex Converse
• [libav-devel] [PATCH 1/3] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH 1/3] fate: Add oneline comparison method   Diego Biurrun
• [libav-devel] [RFC] Audio filters   Anton Khirnov
• [libav-devel] [PATCH 01/22] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Anton Khirnov
• [libav-devel] [PATCH 02/22] samplefmt: add a function for copying audio samples.   Anton Khirnov
• [libav-devel] [PATCH 03/22] lavfi: add vsink_buffer, and use it in avtools   Anton Khirnov
• [libav-devel] [PATCH 04/22] lavfi: add extended_data to AVFilterBuffer.   Anton Khirnov
• [libav-devel] [PATCH 05/22] lavfi: add avfilter_get_audio_buffer_ref_from_arrays().   Anton Khirnov
• [libav-devel] [PATCH 06/22] lavfi: cleanup avfilter_get_audio_buffer() and pals.   Anton Khirnov
• [libav-devel] [PATCH 07/22] lavfi: use avfilter_get_audio_buffer_ref_from_arrays() in avfilter_default_get_audio_buffer   Anton Khirnov
• [libav-devel] [PATCH 08/22] lavfi: simplify signature for avfilter_get_audio_buffer() and friends   Anton Khirnov
• [libav-devel] [PATCH 09/22] lavfi: change AVFilterBufferRefAudioProps.sample_rate from uint32_t to int   Anton Khirnov
• [libav-devel] [PATCH 10/22] lavfi: remove some audio-related function from public API.   Anton Khirnov
• [libav-devel] [PATCH 11/22] lavfi: move audio-related functions to a separate file.   Anton Khirnov
• [libav-devel] [PATCH 12/22] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH 13/22] lavfi: autoinsert resample filter when necessary.   Anton Khirnov
• [libav-devel] [PATCH 14/22] lavfi: add types and functions for channel layout/samplerate negotiation   Anton Khirnov
• [libav-devel] [PATCH 15/22] lavfi: add channel layout/sample rate negotiation.   Anton Khirnov
• [libav-devel] [PATCH 16/22] lavfi: rename vsrc_buffer.c to buffersrc.c   Anton Khirnov
• [libav-devel] [PATCH 17/22] buffersrc: fix invalid read in uninit if the fifo hasn't been allocated   Anton Khirnov
• [libav-devel] [PATCH 18/22] buffersrc: add av_buffersrc_write_frame().   Anton Khirnov
• [libav-devel] [PATCH 19/22] lavfi: add an audio buffer source.   Anton Khirnov
• [libav-devel] [PATCH 20/22] lavfi: add an audio buffer sink.   Anton Khirnov
• [libav-devel] [PATCH 21/22] lavfi: add aformat filter   Anton Khirnov
• [libav-devel] [PATCH 22/22] avconv: add support for audio filters.   Anton Khirnov
• [libav-devel] [PATCH] lagarith: add YUY2 decoding support   Kostya Shishkov
• [libav-devel] [PATCH 1/2] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [PATCH 2/2] fate: Change the probe-format refs to match the final text format committed.   Alex Converse
• [libav-devel] [PATCH] lagarith: add YUY2 decoding support   Luca Barbato
• [libav-devel] [RFC] lockmgr callback inclusion into libs sources   Luca Barbato
• [libav-devel] [PATCH 2/2] fate: Change the probe-format refs to match the final text format committed.   Anton Khirnov
• [libav-devel] [PATCH 12/22] lavfi: add lavr-based audio resampling filter.   Justin Ruggles
• [libav-devel] [PATCH 2/5] dv: Split profile handling code into a separate file.   Diego Biurrun
• [libav-devel] [PATCH 12/22] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH] doc: Replace a stray reference to the old '-intra' flag.   Alex Converse
• [libav-devel] [PATCH] doc: Replace a stray reference to the old '-intra' flag.   Anton Khirnov
• [libav-devel] [PATCH 1/2] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Anton Khirnov
• [libav-devel] [PATCH] libmp3lame: set supported channel layouts.   Anton Khirnov
• [libav-devel] [Debconf-video] video september in paris (Re: [foms] VideoLAN Dev Days 2012   Peter 'p2' De Schrijver
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jordi Ortiz
• [libav-devel] [PATCH 2/2] Dirac: add Comments and references to the standard   Jordi Ortiz
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Luca Barbato
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Måns Rullgård
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [PATCH] libmp3lame: set supported channel layouts.   Justin Ruggles
• [libav-devel] [PATCH 2/2] Dirac: add Comments and references to the standard   Diego Biurrun
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Diego Biurrun
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Diego Biurrun
• [libav-devel] [PATCH 01/22] lavfi: add a function for copying properties from AVFilterBufferRef->AVFrame   Luca Barbato
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Diego Biurrun
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Alex Converse
• [libav-devel] [PATCH] Fix make checkheaders   Alex Converse
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Måns Rullgård
• [libav-devel] [PATCH] Fix make checkheaders   Måns Rullgård
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Alex Converse
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Måns Rullgård
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Luca Barbato
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Luca Barbato
• [libav-devel] [PATCH 02/22] samplefmt: add a function for copying audio samples.   Luca Barbato
• [libav-devel] [PATCH 09/22] lavfi: change AVFilterBufferRefAudioProps.sample_rate from uint32_t to int   Luca Barbato
• [libav-devel] [PATCH 10/22] lavfi: remove some audio-related function from public API.   Luca Barbato
• [libav-devel] [PATCH 11/22] lavfi: move audio-related functions to a separate file.   Luca Barbato
• [libav-devel] mp3: "Header missing" error on last packet w/o seek.   Dale Curtis
• [libav-devel] [PATCH 2/2] lavc: check that extended_data is properly set in avcodec_encode_audio2().   Luca Barbato
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Måns Rullgård
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Måns Rullgård
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Ronald S. Bultje
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Derek Buitenhuis
• [libav-devel] [PATCH] fate: Make oneline comparison ignore CR   Luca Barbato
• [libav-devel] [PATCH] lagarith: add YUY2 decoding support   Nathan Caldwell
• [libav-devel] [PATCH] Support decoding unaligned rgb24 lagarith.   Nathan Caldwell
• [libav-devel] [PATCH] lagarith: add YUY2 decoding support   Kostya Shishkov
• [libav-devel] [PATCH] Support decoding unaligned rgb24 lagarith.   Kostya Shishkov
• [libav-devel] [PATCH] lagarith: add YUY2 decoding support   Nathan Caldwell
• [libav-devel] [PATCH] Support decoding unaligned rgb24 lagarith.   Nathan Caldwell
• [libav-devel] [PATCH] Support decoding unaligned rgb24 lagarith.   Kostya Shishkov
• [libav-devel] [PATCH] Fix make checkheaders   Diego Biurrun
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jordi Ortiz
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Diego Biurrun
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jordi Ortiz
• [libav-devel] [PATCH] rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.   Martin Storsjö
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Diego Biurrun
• [libav-devel] [PATCH] fate: fix dependencies for probe tests   Mans Rullgard
• [libav-devel] [PATCH] fate: fix dependencies for probe tests   Kostya Shishkov
• [libav-devel] [PATCH] fate: fix dependencies for probe tests   Diego Biurrun
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jordi Ortiz
• [libav-devel] [PATCH 2/2] mips: intreadwrite: fix inline asm for gcc 4.8   Kostya Shishkov
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Vitor Sessak
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Diego Biurrun
• [libav-devel] [foms] VideoLAN Dev Days 2012   Steve Lhomme
• [libav-devel] 0.8.2 release announcement -- DRAFT   Sean McGovern
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Derek Buitenhuis
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Kostya Shishkov
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Ronald S. Bultje
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Måns Rullgård
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Derek Buitenhuis
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Justin Ruggles
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Måns Rullgård
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Diego Biurrun
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Justin Ruggles
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Alex Converse
• [libav-devel] [PATCH] fate: fix dependencies for probe tests   Alex Converse
• [libav-devel] [PATCH] fate: fix dependencies for probe tests   Luca Barbato
• [libav-devel] [PATCH] libschroedingerdec: Change AVPicture to AVFrame and use SchroTag to store pts   Jordi Ortiz
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Luca Barbato
• [libav-devel] [PATCH] Fix make checkheaders   Diego Biurrun
• [libav-devel] [PATCH] SCTP: Initial tcp-alike sctp support with streams   Luca Barbato
• [libav-devel] [PATCH 1/3] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Ronald S. Bultje
• [libav-devel] [PATCH] SCTP: Initial tcp-alike sctp support with streams   Luca Barbato
• [libav-devel] [PATCH 1/3] mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.   Luca Barbato
• [libav-devel] [PATCH] libschroedingerdec: Change AVPicture to AVFrame and use SchroTag to store pts   Luca Barbato
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jason Garrett-Glaser
• [libav-devel] [PATCH] SCTP: Initial tcp-alike sctp support with streams   Diego Biurrun
• [libav-devel] fps filter   Nicolas George
• [libav-devel] [PATCH] build: Add 'check' target to run all compile and test targets.   Diego Biurrun
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Diego Biurrun
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Ronald S. Bultje
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Vitor Sessak
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Jason Garrett-Glaser
• [libav-devel] [PATCH] SCTP: Initial tcp-alike sctp support with streams   Martin Storsjö
• [libav-devel] [PATCH 1/2] Dirac: Dirac Native Decoder Base. No asm optimizations   Diego Biurrun
• [libav-devel] [PATCH] fate: improve dependencies   Mans Rullgard
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with AVX   Justin Ruggles
• [libav-devel] [PATCH] fate: improve dependencies   Luca Barbato
• [libav-devel] [PATCH] fate: improve dependencies   Diego Biurrun
• [libav-devel] [PATCH] fate: improve dependencies   Måns Rullgård
• [libav-devel] [PATCH] fate: improve dependencies   Diego Biurrun
• [libav-devel] [PATCH] fate: improve dependencies   Måns Rullgård
• [libav-devel] [PATCH] fate: improve dependencies   Diego Biurrun
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Luca Barbato
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Diego Biurrun
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Måns Rullgård
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Samuel Pitoiset
• [libav-devel] [PATCH 1/3] rtmp: Support 'rtmp_tcurl', an option which overrides the URL of the target stream.   Samuel Pitoiset
• [libav-devel] [PATCH 2/3] rtmp: Support 'rtmp_flashver', an option which overrides the version of the Flash plugin.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.   Samuel Pitoiset
• [libav-devel] [PATCH 1/4] fate: split some combined tests into separate audio and video tests   Mans Rullgard
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Mans Rullgard
• [libav-devel] [PATCH 3/4] fate: improve dependencies   Mans Rullgard
• [libav-devel] [PATCH 4/4] fate: split idroq audio and video into separate tests   Mans Rullgard
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Sean McGovern
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Luca Barbato
• [libav-devel] [PATCH] sctp: fix building on Solaris   Luca Barbato
• [libav-devel] [PATCH 1/4] fate: split some combined tests into separate audio and video tests   Luca Barbato
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Luca Barbato
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Måns Rullgård
• [libav-devel] [PATCH] sctp: fix building on Solaris   Måns Rullgård
• [libav-devel] [PATCH 1/4] fate: split some combined tests into separate audio and video tests   Måns Rullgård
• [libav-devel] [PATCH] sctp: Initial tcp-alike sctp support with streams   Luca Barbato
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Luca Barbato
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Diego Biurrun
• [libav-devel] [PATCH 4/4] fate: split idroq audio and video into separate tests   Diego Biurrun
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Måns Rullgård
• [libav-devel] [PATCH 1/4] fate: split some combined tests into separate audio and video tests   Diego Biurrun
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Diego Biurrun
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Måns Rullgård
• [libav-devel] [PATCH 3/4] fate: improve dependencies   Diego Biurrun
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Diego Biurrun
• [libav-devel] [PATCH 2/4] fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests   Måns Rullgård
• [libav-devel] [PATCH] fate: add convenient shorthands for ea-vp6, vp6, libavcodec, libavutil tests   Diego Biurrun
• [libav-devel] [PATCH] fate: improve dependencies   Diego Biurrun
• [libav-devel] [PATCH] fate: add convenient shorthand for vp6 tests   Diego Biurrun
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Mans Rullgard
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Mans Rullgard
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Anton Khirnov
• [libav-devel] [PATCH 1/2] Solaris: add _XOPEN_SOURCE=600 to preprocessor flags.   Sean McGovern
• [libav-devel] [PATCH 2/2] sctp: be consistent with socket option level   Sean McGovern
• [libav-devel] [PATCH] Audio filters II   Anton Khirnov
• [libav-devel] [PATCH 01/30] libmp3lame: set supported channel layouts.   Anton Khirnov
• [libav-devel] [PATCH 02/30] lavr: make avresample_read() with NULL output discard samples.   Anton Khirnov
• [libav-devel] [PATCH 03/30] lavr: do not try to copy to uninitialized output audio data.   Anton Khirnov
• [libav-devel] [PATCH 04/30] samplefmt: add a function for copying audio samples.   Anton Khirnov
• [libav-devel] [PATCH 05/30] samplefmt: add a memset()-like function for samples.   Anton Khirnov
• [libav-devel] [PATCH 06/30] lavc: pad last audio frame with silence when needed.   Anton Khirnov
• [libav-devel] [PATCH 07/30] lavc: check that extended_data is properly set in avcodec_encode_audio2().   Anton Khirnov
• [libav-devel] [PATCH 08/30] lavfi: add extended_data to AVFilterBuffer.   Anton Khirnov
• [libav-devel] [PATCH 09/30] lavfi: add avfilter_get_audio_buffer_ref_from_arrays().   Anton Khirnov
• [libav-devel] [PATCH 10/30] lavfi: cleanup avfilter_get_audio_buffer() and pals.   Anton Khirnov
• [libav-devel] [PATCH 11/30] lavfi: use avfilter_get_audio_buffer_ref_from_arrays() in avfilter_default_get_audio_buffer   Anton Khirnov
• [libav-devel] [PATCH 12/30] lavfi: simplify signature for avfilter_get_audio_buffer() and friends   Anton Khirnov
• [libav-devel] [PATCH 13/30] lavfi: change AVFilterBufferRefAudioProps.sample_rate from uint32_t to int   Anton Khirnov
• [libav-devel] [PATCH 14/30] lavfi: change AVFilterLink.sample_rate from int64_t to int.   Anton Khirnov
• [libav-devel] [PATCH 15/30] lavfi: remove some audio-related function from public API.   Anton Khirnov
• [libav-devel] [PATCH 16/30] lavfi: move audio-related functions to a separate file.   Anton Khirnov
• [libav-devel] [PATCH 17/30] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH 18/30] lavfi: autoinsert resample filter when necessary.   Anton Khirnov
• [libav-devel] [PATCH 19/30] lavfi: add types and functions for channel layout/samplerate negotiation   Anton Khirnov
• [libav-devel] [PATCH 20/30] lavfi: add channel layout/sample rate negotiation.   Anton Khirnov
• [libav-devel] [PATCH 21/30] avfiltergraph: reindent   Anton Khirnov
• [libav-devel] [PATCH 22/30] lavfi: rename vsrc_buffer.c to buffersrc.c   Anton Khirnov
• [libav-devel] [PATCH 23/30] buffersrc: fix invalid read in uninit if the fifo hasn't been allocated   Anton Khirnov
• [libav-devel] [PATCH 24/30] buffersrc: add av_buffersrc_write_frame().   Anton Khirnov
• [libav-devel] [PATCH 25/30] lavfi: add an audio buffer source.   Anton Khirnov
• [libav-devel] [PATCH 26/30] lavfi: add an audio buffer sink.   Anton Khirnov
• [libav-devel] [PATCH 27/30] lavfi: add aformat filter   Anton Khirnov
• [libav-devel] [PATCH 28/30] lavfi: add asyncts filter.   Anton Khirnov
• [libav-devel] [PATCH 29/30] avconv: add support for audio filters.   Anton Khirnov
• [libav-devel] [PATCH 30/30] avconv: automatically insert asyncts when -async is used.   Anton Khirnov
• [libav-devel] [Debconf-video] video september in paris (Re: [foms] VideoLAN Dev Days 2012   Wouter Verhelst
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Martin Storsjö
• [libav-devel] [PATCH 3/3] rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] Solaris: add _XOPEN_SOURCE=600 to preprocessor flags.   Diego Biurrun
• [libav-devel] [PATCH 2/2] sctp: be consistent with socket option level   Diego Biurrun
• [libav-devel] Windows builds   Alex Buloichik
• [libav-devel] [PATCH 05/30] samplefmt: add a memset()-like function for samples.   Diego Biurrun
• [libav-devel] [PATCH 09/30] lavfi: add avfilter_get_audio_buffer_ref_from_arrays().   Diego Biurrun
• [libav-devel] [PATCH 15/30] lavfi: remove some audio-related function from public API.   Diego Biurrun
• [libav-devel] [PATCH 22/30] lavfi: rename vsrc_buffer.c to buffersrc.c   Diego Biurrun
• [libav-devel] [PATCH] fate: add convenient shorthand for vp6 tests   Diego Biurrun
• [libav-devel] [PATCH] fate: employ better names and add a convenient shorthand for vp6 tests   Diego Biurrun
• [libav-devel] [PATCH 2/2] sctp: be consistent with socket option level   Måns Rullgård
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Janne Grunau
• [libav-devel] [PATCH] fate: employ better names and add a convenient shorthand for vp6 tests   Måns Rullgård
• [libav-devel] [PATCH] fate: employ better names and add a convenient shorthand for vp6 tests   Diego Biurrun
• [libav-devel] [PATCH] fate: employ better names and add a convenient shorthand for vp6 tests   Kostya Shishkov
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with SSE4 and AVX   Justin Ruggles
• [libav-devel] [PATCH 01/30] libmp3lame: set supported channel layouts.   Justin Ruggles
• [libav-devel] [PATCH 05/30] samplefmt: add a memset()-like function for samples.   Justin Ruggles
• [libav-devel] [PATCH 02/30] lavr: make avresample_read() with NULL output discard samples.   Justin Ruggles
• [libav-devel] [PATCH 03/30] lavr: do not try to copy to uninitialized output audio data.   Justin Ruggles
• [libav-devel] [PATCH 04/30] samplefmt: add a function for copying audio samples.   Justin Ruggles
• [libav-devel] [PATCH 06/30] lavc: pad last audio frame with silence when needed.   Justin Ruggles
• [libav-devel] [PATCH 07/30] lavc: check that extended_data is properly set in avcodec_encode_audio2().   Justin Ruggles
• [libav-devel] [PATCH 05/30] samplefmt: add a memset()-like function for samples.   Anton Khirnov
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Diego Biurrun
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Kostya Shishkov
• [libav-devel] [PATCH 08/30] lavfi: add extended_data to AVFilterBuffer.   Justin Ruggles
• [libav-devel] [PATCH] samplefmt: add a function for copying audio samples.   Anton Khirnov
• [libav-devel] [PATCH 1/3] fate: Give more consistent names to some RealVideo/RealAudio tests.   Diego Biurrun
• [libav-devel] [PATCH 09/30] lavfi: add avfilter_get_audio_buffer_ref_from_arrays().   Justin Ruggles
• [libav-devel] [PATCH] fate: cosmetics: lowercase some comments   Diego Biurrun
• [libav-devel] [PATCH] samplefmt: add a function for copying audio samples.   Anton Khirnov
• [libav-devel] [PATCH] samplefmt: add a function for copying audio samples.   Justin Ruggles
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Diego Biurrun
• [libav-devel] [PATCH] cmdutils: Add fallback case to switch in check_stream_specifier().   Diego Biurrun
• [libav-devel] [PATCH] fate: cosmetics: lowercase some comments   Måns Rullgård
• [libav-devel] [PATCH] samplefmt: add a function for filling a buffer with silence.   Anton Khirnov
• [libav-devel] [PATCH] libxvid: Separate libxvid encoder from libxvid rate control code.   Justin Ruggles
• [libav-devel] [PATCH] libxvid: Separate libxvid encoder from libxvid rate control code.   Diego Biurrun
• [libav-devel] [PATCH 05/30] samplefmt: add a memset()-like function for samples.   Kieran Kunhya
• [libav-devel] [PATCH 1/6] vcr1: K&R formatting cosmetics, fix typos, drop some dead code   Diego Biurrun
• [libav-devel] [PATCH 2/6] vcr1: group encoder code together to save #ifdefs   Diego Biurrun
• [libav-devel] [PATCH 3/6] vcr1: drop pointless write-only AVCodecContext member from VCR1Context   Diego Biurrun
• [libav-devel] [PATCH 4/6] vcr1: cosmetics: drop some parentheses, prettyprint, comment an #endif   Diego Biurrun
• [libav-devel] [PATCH 5/6] vcr1: drop pointless empty encode_init() wrapper function   Diego Biurrun
• [libav-devel] [PATCH 6/6] vcr1enc: Replace obsolete get_bit_count() by put_bits_count().   Diego Biurrun
• [libav-devel] [PATCH] samplefmt: add a function for filling a buffer with silence.   Justin Ruggles
• [libav-devel] [PATCH] lavfi: change AVFilterLink.sample_rate from int64_t to int on next bump   Anton Khirnov
• [libav-devel] [PATCH] lavfi: change AVFilterLink.sample_rate from int64_t to int on next bump   Måns Rullgård
• [libav-devel] [PATCH] libxvid: Give more suitable names to libxvid-related files.   Diego Biurrun
• [libav-devel] [PATCH 12/12] jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().   Kostya Shishkov
• [libav-devel] [PATCH 1/6] vcr1: K&R formatting cosmetics, fix typos, drop some dead code   Kostya Shishkov
• [libav-devel] [PATCH 2/6] vcr1: group encoder code together to save #ifdefs   Kostya Shishkov
• [libav-devel] [PATCH 3/6] vcr1: drop pointless write-only AVCodecContext member from VCR1Context   Kostya Shishkov
• [libav-devel] [PATCH 4/6] vcr1: cosmetics: drop some parentheses, prettyprint, comment an #endif   Kostya Shishkov
• [libav-devel] [PATCH 5/6] vcr1: drop pointless empty encode_init() wrapper function   Kostya Shishkov
• [libav-devel] [PATCH 6/6] vcr1enc: Replace obsolete get_bit_count() by put_bits_count().   Kostya Shishkov
• [libav-devel] [PATCH] libxvid: Give more suitable names to libxvid-related files.   Justin Ruggles
• [libav-devel] [PATCH 4/6] vcr1: cosmetics: drop some parentheses, prettyprint, comment an #endif   Diego Biurrun
• [libav-devel] [PATCH] cmdutils: Add fallback case to switch in check_stream_specifier().   Diego Biurrun
• [libav-devel] [PATCH] mov: make one comment slightly more specific   Diego Biurrun
• [libav-devel] [PATCH] mov: make one comment slightly more specific   Anton Khirnov
• [libav-devel] [PATCH 10/30] lavfi: cleanup avfilter_get_audio_buffer() and pals.   Justin Ruggles
• [libav-devel] [PATCH 11/30] lavfi: use avfilter_get_audio_buffer_ref_from_arrays() in avfilter_default_get_audio_buffer   Justin Ruggles
• [libav-devel] [PATCH 12/30] lavfi: simplify signature for avfilter_get_audio_buffer() and friends   Justin Ruggles
• [libav-devel] [PATCH 13/30] lavfi: change AVFilterBufferRefAudioProps.sample_rate from uint32_t to int   Justin Ruggles
• [libav-devel] [PATCH 15/30] lavfi: remove some audio-related function from public API.   Justin Ruggles
• [libav-devel] [PATCH 16/30] lavfi: move audio-related functions to a separate file.   Justin Ruggles
• [libav-devel] [PATCH 4/6] vcr1: cosmetics: drop some parentheses, prettyprint, comment an #endif   Kostya Shishkov
• [libav-devel] [PATCH] vcr1: cosmetics: K&R prettyprinting, typos, parentheses, dead code, comments   Diego Biurrun
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with SSE4 and AVX   Vitor Sessak
• [libav-devel] [PATCH 1/4] fate: split some combined tests into separate audio and video tests   Luca Barbato
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Luca Barbato
• [libav-devel] [PATCH] lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with SSE4 and AVX   Justin Ruggles
• [libav-devel] [PATCH 17/30] lavfi: add lavr-based audio resampling filter.   Justin Ruggles
• [libav-devel] [PATCH] sctp: fix building on Solaris   Luca Barbato
• [libav-devel] [PATCH] sctp: fix building on Solaris   Sean McGovern
• [libav-devel] [PATCH] sctp: fix building on Solaris   Luca Barbato
• [libav-devel] [PATCH] vcr1: cosmetics: K&R prettyprinting, typos, parentheses, dead code, comments   Kostya Shishkov
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Måns Rullgård
• [libav-devel] [PATCH 29/30] avconv: add support for audio filters.   Justin Ruggles
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Måns Rullgård
• [libav-devel] [PATCH] cmdutils: Add fallback case to switch in check_stream_specifier().   Diego Biurrun
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] arm: dsputil: fix overreads in put/avg_pixels functions   Mans Rullgard
• [libav-devel] Fwd: 0.8.2 release announcement -- DRAFT   Sean McGovern
• [libav-devel] Fwd: 0.8.2 release announcement -- DRAFT   Anton Khirnov
• [libav-devel] [PATCH] arm: dsputil: fix overreads in put/avg_pixels functions   Kostya Shishkov
• [libav-devel] [PATCH 1/2] fmtconvert: Add optimized int32 to int16 clipping function.   Aneesh Dogra
• [libav-devel] [PATCH 2/2] tta: Use optimized int32 to int16 function.   Aneesh Dogra
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Martin Storsjö
• [libav-devel] [PATCH 3/3] rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.   Martin Storsjö
• [libav-devel] [PATCH 2/2] h264: K&R formatting cosmetics for header files (part II/II)   Diego Biurrun
• [libav-devel] [PATCH 1/2] h264: K&R formatting cosmetics for header files (part I/II)   Diego Biurrun
• [libav-devel] [PATCH] avconv: use lrint() for rounding double timestamps   Mans Rullgard
• [libav-devel] [PATCH] avconv: use lrint() for rounding double timestamps   Kostya Shishkov
• [libav-devel] [libav-commits] fate: Add avprobe as a make dependency   Diego Biurrun
• [libav-devel] [PATCH] vqavideo: change x/y loop counters to the usual pattern   Mans Rullgard
• [libav-devel] [PATCH] vqavideo: change x/y loop counters to the usual pattern   Kostya Shishkov
• [libav-devel] [PATCH] ape: Use unsigned integer maths   Christophe Gisquet
• [libav-devel] [PATCH 06/12] rv40dsp x86: distinguish non-edge/edge versions.   Christophe Gisquet
• [libav-devel] [PATCH] rtmp: Implement check bandwidth notification.   Luca Barbato
• [libav-devel] [PATCH 01/12] rv40dsp x86: MMX/MMX2/3DNow/SSE2/SSSE3 implementations of MC   Christophe Gisquet
• [libav-devel] [PATCH 12/12] rv40dsp: defer pixel access and computations untill they are needed   Christophe Gisquet
• [libav-devel] [PATCH 06/12] rv40dsp x86: distinguish non-edge/edge versions.   Måns Rullgård
• [libav-devel] [PATCH 06/12] rv40dsp x86: distinguish non-edge/edge versions.   Christophe Gisquet
• [libav-devel] [PATCH] ape: Use unsigned integer maths   Diego Biurrun
• [libav-devel] [PATCH] arm: dsputil: prettify some conditional instructions in put_pixels macros   Mans Rullgard
• [libav-devel] [PATCH] arm: dsputil: prettify some conditional instructions in put_pixels macros   Kostya Shishkov
• [libav-devel] [PATCH 12/12] rv40dsp: defer pixel access and computations untill they are needed   Ronald S. Bultje
• [libav-devel] [PATCH] avconv: use lrint() for rounding double timestamps   Anton Khirnov
• [libav-devel] [PATCH 01/12] rv40dsp x86: MMX/MMX2/3DNow/SSE2/SSSE3 implementations of MC   Ronald S. Bultje
• [libav-devel] [PATCH 2/2] tta: Use optimized int32 to int16 function.   Ronald S. Bultje
• [libav-devel] [PATCH] arm/neon: dsputil: use correct size specifiers on vld1/vst1   Mans Rullgard
• [libav-devel] [PATCH 01/12] rv40dsp x86: MMX/MMX2/3DNow/SSE2/SSSE3 implementations of MC   Diego Biurrun
• [libav-devel] [PATCH 2/2] tta: Use optimized int32 to int16 function.   Ronald S. Bultje
• [libav-devel] [Debconf-video] video september in paris (Re: [foms] VideoLAN Dev Days 2012   Trever Fischer
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Anton Khirnov
• [libav-devel] [PATCH] arm/neon: dsputil: use correct size specifiers on vld1/vst1   Kostya Shishkov
• [libav-devel] [PATCH] lavfi: autoinsert resample filter when necessary.   Anton Khirnov
• [libav-devel] [PATCH 1/3] rtmp: Declare the hostname of the flash server in the handler context.   Samuel Pitoiset
• [libav-devel] [PATCH 2/3] rtmp: Declare the port of the flash server in the handler context.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] rtmp: Add an additional output handle for HTTP tunneling.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] rtmp: Add an additional output handle for HTTP tunneling.   Luca Barbato
• [libav-devel] [PATCH 3/3] rtmp: Add an additional output handle for HTTP tunneling.   Martin Storsjö
• [libav-devel] [PATCH] lavfi: add lavr-based audio resampling filter.   Luca Barbato
• [libav-devel] [PATCH] lavfi: autoinsert resample filter when necessary.   Luca Barbato
• [libav-devel] [PATCH 3/3] rtmp: Add an additional output handle for HTTP tunneling.   Luca Barbato
• [libav-devel] [PATCH] Announce Release 0.8.2   Sean McGovern
• [libav-devel] [PATCH] doc: update Windows section   Diego Biurrun
• [libav-devel] [PATCH] fate: separate delphine-cin audio and video tests   Mans Rullgard
• [libav-devel] [PATCH] fate: separate delphine-cin audio and video tests   Kostya Shishkov
• [libav-devel] [PATCH] fate: separate delphine-cin audio and video tests   Diego Biurrun
• [libav-devel] [RFC] FATE fixes for i586 CPUs   Diego Biurrun
• [libav-devel] [PATCH 1/5] x86: ac3: drop ff_ac3_max_msb_abs_int16_mmx, which contains SSE instructions   Diego Biurrun
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 3/5] x86: vc1: drop MMX loop filter, which uses MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 4/5] x86: h264: prevent gcc from issuing a i686 nopl instruction on i586 machines   Diego Biurrun
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Diego Biurrun
• [libav-devel] [PATCH 4/5] x86: h264: prevent gcc from issuing a i686 nopl instruction on i586 machines   Måns Rullgård
• [libav-devel] [PATCH 3/5] x86: vc1: drop MMX loop filter, which uses MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 05/12] rv40dsp x86: start implementing loop filtering   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 4/5] x86: h264: prevent gcc from issuing a i686 nopl instruction on i586 machines   Ronald S. Bultje
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Ronald S. Bultje
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Måns Rullgård
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Måns Rullgård
• [libav-devel] [PATCH 05/12] rv40dsp x86: start implementing loop filtering   Ronald S. Bultje
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 05/12] rv40dsp x86: start implementing loop filtering   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Jason Garrett-Glaser
• [libav-devel] [PATCH 01/19] fate: disable pcm audio in some video tests   Mans Rullgard
• [libav-devel] [PATCH 02/19] fate: mtv: disable video decoding   Mans Rullgard
• [libav-devel] [PATCH 03/19] fate: pcm-planar: disable video   Mans Rullgard
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 04/19] fate: qtrle: disable audio in all tests   Mans Rullgard
• [libav-devel] [PATCH 05/19] fate: truemotion1: disable audio   Mans Rullgard
• [libav-devel] [PATCH 06/19] fate: separate delphine-cin audio and video tests   Mans Rullgard
• [libav-devel] [PATCH 07/19] fate: separate bmv audio and video tests   Mans Rullgard
• [libav-devel] [PATCH 08/19] fate: separate smacker audio and video tests   Mans Rullgard
• [libav-devel] [PATCH 09/19] fate: separate sierra-vmd audio and video tests   Mans Rullgard
• [libav-devel] [PATCH 10/19] fate: split off adpcm-ima-amv from amv test   Mans Rullgard
• [libav-devel] [PATCH 11/19] fate: add adpcm-ima-smjpeg test   Mans Rullgard
• [libav-devel] [PATCH 12/19] fate: split off adpcm-ima-ws test from vqa-cc   Mans Rullgard
• [libav-devel] [PATCH 13/19] fate: split off adpcm-ms-mono test from dxa-feeble   Mans Rullgard
• [libav-devel] [PATCH 14/19] fate: rename adpcm-psx-str-v3 to adpcm-xa   Mans Rullgard
• [libav-devel] [PATCH 15/19] fate: rename cryo-apc to adpcm-ima-apc   Mans Rullgard
• [libav-devel] [PATCH 16/19] fate: rename funcom-iss to adpcm-ima-iss   Mans Rullgard
• [libav-devel] [PATCH 17/19] fate: split off dpcm-interplay from interplay-mve tests   Mans Rullgard
• [libav-devel] [PATCH 18/19] fate: fix smjpeg demux test   Mans Rullgard
• [libav-devel] [PATCH 19/19] fate: d-cinema-demux: drop unnecessary flags   Mans Rullgard
• [libav-devel] [PATCH 05/19] fate: truemotion1: disable audio   Kostya Shishkov
• [libav-devel] [PATCH 06/19] fate: separate delphine-cin audio and video tests   Kostya Shishkov
• [libav-devel] [PATCH 07/19] fate: separate bmv audio and video tests   Kostya Shishkov
• [libav-devel] [PATCH 06/19] fate: separate delphine-cin audio and video tests   Måns Rullgård
• [libav-devel] [PATCH 07/19] fate: separate bmv audio and video tests   Måns Rullgård
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 07/19] fate: separate bmv audio and video tests   Kostya Shishkov
• [libav-devel] [PATCH 1/5] x86: ac3: drop ff_ac3_max_msb_abs_int16_mmx, which contains SSE instructions   Justin Ruggles
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Ronald S. Bultje
• [libav-devel] [PATCH 1/2] fate: convert psx-str to a demuxer test   Mans Rullgard
• [libav-devel] [PATCH 2/2] fate: film-cvid: drop pcm audio and rename test   Mans Rullgard
• [libav-devel] [PATCH 2/2] fate: film-cvid: drop pcm audio and rename test   Luca Barbato
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Vitor Sessak
• [libav-devel] [PATCH 2/3] build: add XOP instruction set support   Vitor Sessak
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Vitor Sessak
• [libav-devel] [PATCH] x86: Avoid movs on BUTTERFLYPS when in AVX mode   Vitor Sessak
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Vitor Sessak
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Jason Garrett-Glaser
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Ronald S. Bultje
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Jason Garrett-Glaser
• [libav-devel] [PATCH 2/3] build: add XOP instruction set support   Måns Rullgård
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Måns Rullgård
• [libav-devel] [PATCH] x86: use more standard construct for setting ASM funcitons in FFT code   Vitor Sessak
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Vitor Sessak
• [libav-devel] [PATCH] x86: use more standard construct for setting ASM funcitons in FFT code   Diego Biurrun
• [libav-devel] [PATCH] x86: use more standard construct for setting ASM funcitons in FFT code   Måns Rullgård
• [libav-devel] [PATCH 04/19] fate: qtrle: disable audio in all tests   Diego Biurrun
• [libav-devel] [PATCH 03/19] fate: pcm-planar: disable video   Diego Biurrun
• [libav-devel] [PATCH 02/19] fate: mtv: disable video decoding   Diego Biurrun
• [libav-devel] [PATCH 08/19] fate: separate smacker audio and video tests   Diego Biurrun
• [libav-devel] [PATCH 1/5] x86: ac3: drop ff_ac3_max_msb_abs_int16_mmx, which contains SSE instructions   Diego Biurrun
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 4/5] x86: h264: prevent gcc from issuing a i686 nopl instruction on i586 machines   Diego Biurrun
• [libav-devel] [PATCH 4/5] x86: h264: prevent gcc from issuing a i686 nopl instruction on i586 machines   Diego Biurrun
• [libav-devel] [PATCH 09/19] fate: separate sierra-vmd audio and video tests   Diego Biurrun
• [libav-devel] [PATCH 10/19] fate: split off adpcm-ima-amv from amv test   Diego Biurrun
• [libav-devel] [PATCH 1/3] fate: caf: disable decoding   Mans Rullgard
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Mans Rullgard
• [libav-devel] [PATCH 3/3] fate: westwood-aud: disable decoding   Mans Rullgard
• [libav-devel] [PATCH 11/19] fate: add adpcm-ima-smjpeg test   Diego Biurrun
• [libav-devel] [PATCH 1/3] fate: caf: disable decoding   Diego Biurrun
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Diego Biurrun
• [libav-devel] [PATCH 12/19] fate: split off adpcm-ima-ws test from vqa-cc   Diego Biurrun
• [libav-devel] [PATCH 13/19] fate: split off adpcm-ms-mono test from dxa-feeble   Diego Biurrun
• [libav-devel] [PATCH 14/19] fate: rename adpcm-psx-str-v3 to adpcm-xa   Diego Biurrun
• [libav-devel] [PATCH 15/19] fate: rename cryo-apc to adpcm-ima-apc   Diego Biurrun
• [libav-devel] [PATCH 15/19] fate: rename cryo-apc to adpcm-ima-apc   Kostya Shishkov
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Vitor Sessak
• [libav-devel] [PATCH 16/19] fate: rename funcom-iss to adpcm-ima-iss   Diego Biurrun
• [libav-devel] [PATCH 18/19] fate: fix smjpeg demux test   Diego Biurrun
• [libav-devel] [PATCH 19/19] fate: d-cinema-demux: drop unnecessary flags   Diego Biurrun
• [libav-devel] [PATCH 17/19] fate: split off dpcm-interplay from interplay-mve tests   Diego Biurrun
• [libav-devel] [PATCH 01/19] fate: disable pcm audio in some video tests   Diego Biurrun
• [libav-devel] [PATCH] sws: fix planar RGB input conversions for 9/10/16 bpp.   Ronald S. Bultje
• [libav-devel] [PATCH] build: Add 'check' target to run all compile and test targets.   Diego Biurrun
• [libav-devel] [PATCH] build: Add 'check' target to run all compile and test targets.   Luca Barbato
• [libav-devel] [PATCH] sws: fix planar RGB input conversions for 9/10/16 bpp.   Luca Barbato
• [libav-devel] [PATCH 04/12] gxfenc: remove disabled code   Diego Biurrun
• [libav-devel] [PATCH 12/12] motion-test: remove disabled code   Diego Biurrun
• [libav-devel] [PATCH 01/13] libmp3lame: set supported channel layouts.   Anton Khirnov
• [libav-devel] [PATCH 02/13] lavfi: add types and functions for channel layout/samplerate negotiation   Anton Khirnov
• [libav-devel] [PATCH 03/13] lavfi: add channel layout/sample rate negotiation.   Anton Khirnov
• [libav-devel] [PATCH 04/13] avfiltergraph: reindent   Anton Khirnov
• [libav-devel] [PATCH 05/13] lavfi: rename vsrc_buffer.c to buffersrc.c   Anton Khirnov
• [libav-devel] [PATCH 06/13] buffersrc: fix invalid read in uninit if the fifo hasn't been allocated   Anton Khirnov
• [libav-devel] [PATCH 07/13] buffersrc: add av_buffersrc_write_frame().   Anton Khirnov
• [libav-devel] [PATCH 08/13] lavfi: add an audio buffer source.   Anton Khirnov
• [libav-devel] [PATCH 09/13] lavfi: add an audio buffer sink.   Anton Khirnov
• [libav-devel] [PATCH 10/13] lavfi: add aformat filter   Anton Khirnov
• [libav-devel] [PATCH 11/13] lavfi: add asyncts filter.   Anton Khirnov
• [libav-devel] [PATCH 12/13] avconv: add support for audio filters.   Anton Khirnov
• [libav-devel] [PATCH 13/13] avconv: automatically insert asyncts when -async is used.   Anton Khirnov
• [libav-devel] [PATCH] Announce Release 0.8.2   Anton Khirnov
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Anton Khirnov
• [libav-devel] [PATCH 01/13] libmp3lame: set supported channel layouts.   Luca Barbato
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Martin Storsjö
• [libav-devel] [PATCH 01/19] fate: disable pcm audio in some video tests   Alex Converse
• [libav-devel] [PATCH] sws: fix planar RGB input conversions for 9/10/16 bpp.   Derek Buitenhuis
• [libav-devel] [PATCH] sws: fix planar RGB input conversions for 9/10/16 bpp.   Ronald S. Bultje
• [libav-devel] [PATCH] sws: fix planar RGB input conversions for 9/10/16 bpp.   Derek Buitenhuis
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Martin Storsjö
• [libav-devel] [PATCH] doc: fix link to fate.libav.org   Diego Elio Pettenò
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] doc: fix link to fate.libav.org   Derek Buitenhuis
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Martin Storsjö
• [libav-devel] [PATCH 04/13] avfiltergraph: reindent   Diego Biurrun
• [libav-devel] [PATCH 05/13] lavfi: rename vsrc_buffer.c to buffersrc.c   Diego Biurrun
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Diego Biurrun
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Diego Biurrun
• [libav-devel] [PATCH] build: Add 'check' target to run all compile and test targets.   Diego Biurrun
• [libav-devel] LinuxTag   Diego Biurrun
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Måns Rullgård
• [libav-devel] [PATCH 17/19] fate: split off dpcm-interplay from interplay-mve tests   Måns Rullgård
• [libav-devel] [PATCH 17/19] fate: split off dpcm-interplay from interplay-mve tests   Diego Biurrun
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Luca Barbato
• [libav-devel] [PATCH 3/3] fate: westwood-aud: disable decoding   Derek Buitenhuis
• [libav-devel] [PATCH 02/13] lavfi: add types and functions for channel layout/samplerate negotiation   Luca Barbato
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 03/13] lavfi: add channel layout/sample rate negotiation.   Luca Barbato
• [libav-devel] [PATCH 06/13] buffersrc: fix invalid read in uninit if the fifo hasn't been allocated   Luca Barbato
• [libav-devel] [PATCH 07/13] buffersrc: add av_buffersrc_write_frame().   Luca Barbato
• [libav-devel] [PATCH 08/13] lavfi: add an audio buffer source.   Luca Barbato
• [libav-devel] [PATCH 09/13] lavfi: add an audio buffer sink.   Luca Barbato
• [libav-devel] [PATCH 10/13] lavfi: add aformat filter   Luca Barbato
• [libav-devel] [PATCH 11/13] lavfi: add asyncts filter.   Luca Barbato
• [libav-devel] [PATCH 12/13] avconv: add support for audio filters.   Luca Barbato
• [libav-devel] [PATCH 13/13] avconv: automatically insert asyncts when -async is used.   Luca Barbato
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Diego Elio Pettenò
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Vitor Sessak
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Luca Barbato
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Diego Biurrun
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Diego Biurrun
• [libav-devel] [PATCH] x86: h264: prevent yasm from issuing a i686 nopl instruction on i586 machines   Diego Biurrun
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 1/2] avprobe: close opened codecs after use   Janne Grunau
• [libav-devel] [PATCH 2/2] avprobe: free options at the end of main()   Janne Grunau
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Diego Biurrun
• [libav-devel] [PATCH] doc: update Windows section   Martin Storsjö
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Diego Biurrun
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Diego Biurrun
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Måns Rullgård
• [libav-devel] [PATCH 1/3] vcr1enc: Replace obsolete get_bit_count by put_bits_count/flush_put_bits.   Diego Biurrun
• [libav-devel] [PATCH 2/3] vcr1: Fix return type of common_init to match the function pointer signature.   Diego Biurrun
• [libav-devel] [PATCH 3/3] vcr1: Add vcr1_ prefixes to all static functions with generic names.   Diego Biurrun
• [libav-devel] [PATCH 1/3] vcr1enc: Replace obsolete get_bit_count by put_bits_count/flush_put_bits.   Kostya Shishkov
• [libav-devel] [PATCH 2/3] vcr1: Fix return type of common_init to match the function pointer signature.   Kostya Shishkov
• [libav-devel] [PATCH 3/3] vcr1: Add vcr1_ prefixes to all static functions with generic names.   Kostya Shishkov
• [libav-devel] [PATCH 1/3] vcr1enc: Replace obsolete get_bit_count by put_bits_count/flush_put_bits.   Måns Rullgård
• [libav-devel] [PATCH 1/3] vcr1enc: Replace obsolete get_bit_count by put_bits_count/flush_put_bits.   Kostya Shishkov
• [libav-devel] [PATCH 04/12] gxfenc: remove disabled code   Janne Grunau
• [libav-devel] [PATCH 12/12] motion-test: remove disabled code   Janne Grunau
• [libav-devel] [PATCH 08/13] lavfi: add an audio buffer source.   Diego Biurrun
• [libav-devel] [PATCH 12/12] motion-test: remove disabled code   Måns Rullgård
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Janne Grunau
• [libav-devel] [PATCH] avprobe: don't print format entry name when only one was requested   Måns Rullgård
• [libav-devel] [PATCH 1/2] yadif: Improve pts accuracy.   Robert Nagy
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 15/19] fate: rename cryo-apc to adpcm-ima-apc   Diego Biurrun
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Diego Biurrun
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 12/12] motion-test: remove disabled code   Diego Biurrun
• [libav-devel] [PATCH] x86: use more standard construct for setting ASM funcitons in FFT code   Diego Biurrun
• [libav-devel] [RFC] [PATCH] avcodec/utils: cast a function argument to shut up a compiler warning   Diego Biurrun
• [libav-devel] [RFC] [PATCH] avcodec/utils: cast a function argument to shut up a compiler warning   Måns Rullgård
• [libav-devel] [RFC] [PATCH] avcodec/utils: cast a function argument to shut up a compiler warning   Diego Biurrun
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Ronald S. Bultje
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 3/3] x86: add XOP code for FFT   Måns Rullgård
• [libav-devel] [PATCH 13/13] avconv: automatically insert asyncts when -async is used.   Justin Ruggles
• [libav-devel] [PATCH] mtv: do not byteswap raw video in demuxer   Mans Rullgard
• [libav-devel] [PATCH] fate: rename psx-str-v3-mdec to mdec-v3   Mans Rullgard
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Måns Rullgård
• [libav-devel] [PATCH] mtv: do not byteswap raw video in demuxer   Ronald S. Bultje
• [libav-devel] [PATCH] fate: rename psx-str-v3-mdec to mdec-v3   Diego Biurrun
• [libav-devel] [PATCH 2/2] avprobe: free options at the end of main()   Luca Barbato
• [libav-devel] [PATCH] fate: cosmetics: Replace '_' by '-' in test names for consistency.   Diego Biurrun
• [libav-devel] [PATCH] fate: cosmetics: Replace '_' by '-' in test names for consistency.   Måns Rullgård
• [libav-devel] [PATCH] fate: cosmetics: Replace '_' by '-' in test names for consistency.   Diego Biurrun
• [libav-devel] [PATCH] build: Add 'check' target to run all compile and test targets.   Diego Biurrun
• [libav-devel] [PATCH 2/3] fate: make psx-str-v3-mdec a demux test and rename it   Vitor Sessak
• [libav-devel] [PATCH 1/4] indeo3: ensure that decoded cell data is in 7-bit range as presumed by decoder   Kostya Shishkov
• [libav-devel] [PATCH 2/4] indeo3: initialise pixel planes on allocation   Kostya Shishkov
• [libav-devel] [PATCH 3/4] indeo3: when freeing buffers, set pointers referencing them to NULL as well   Kostya Shishkov
• [libav-devel] [PATCH 4/4] indeo3: validate new frame size before resetting decoder   Kostya Shishkov
• [libav-devel] [PATCH 3/4] indeo3: when freeing buffers, set pointers referencing them to NULL as well   Janne Grunau
• [libav-devel] [PATCH 2/2] yadif: Flush filter on eof.   Robert Nagy
• [libav-devel] [PATCH 4/4] indeo3: validate new frame size before resetting decoder   Janne Grunau
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Robert Nagy
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Robert Nagy
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Luca Barbato
• [libav-devel] [PATCH 01/19] fate: disable pcm audio in some video tests   Måns Rullgård
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Robert Nagy
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Robert Nagy
• [libav-devel] [PATCH 1/5] lavfi: move video-related functions to a separate file.   Anton Khirnov
• [libav-devel] [PATCH 2/5] lavfi: move formats-related functions from default.c to formats.c   Anton Khirnov
• [libav-devel] [PATCH 3/5] lavfi: remove default config_props() callback and refactor avfilter_config_links()   Anton Khirnov
• [libav-devel] [PATCH 4/5] lavfi: move buffer management function to a separate file.   Anton Khirnov
• [libav-devel] [PATCH 5/5] Add missing version bumps and APIchanges/Chanelog entries.   Anton Khirnov
• [libav-devel] [PATCH 3/5] lavfi: remove default config_props() callback and refactor avfilter_config_links()   Anton Khirnov
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Justin Ruggles
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Måns Rullgård
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Justin Ruggles
• [libav-devel] [PATCH 5/5] Add missing version bumps and APIchanges/Chanelog entries.   Justin Ruggles
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Måns Rullgård
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Justin Ruggles
• [libav-devel] [PATCH 3/3] lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs   Justin Ruggles
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Janne Grunau
• [libav-devel] [PATCH 1/5] lavfi: move video-related functions to a separate file.   Janne Grunau
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Jason Garrett-Glaser
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Luca Barbato
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Luca Barbato
• [libav-devel] [PATCH 5/5] Add missing version bumps and APIchanges/Chanelog entries.   Diego Biurrun
• [libav-devel] [PATCH 1/5] lavfi: move video-related functions to a separate file.   Luca Barbato
• [libav-devel] [PATCH 2/5] lavfi: move formats-related functions from default.c to formats.c   Luca Barbato
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [PATCH 4/5] lavfi: move buffer management function to a separate file.   Luca Barbato
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Alex Converse
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Justin Ruggles
• [libav-devel] [PATCH] fate: use standard diff options   Mans Rullgard
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Luca Barbato
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Diego Biurrun
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Diego Biurrun
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Luca Barbato
• [libav-devel] [RFC] fate: remove \r and \n from result in oneline comparison   Måns Rullgård
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Måns Rullgård
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Diego Biurrun
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Diego Biurrun
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Måns Rullgård
• [libav-devel] [PATCH] rtmp: fix url parsing   Luca Barbato
• [libav-devel] [PATCH] rtmp: support connection parameters   Luca Barbato
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Diego Biurrun
• [libav-devel] [PATCH] ac3dsp: use cpuflags and a new macro to simplify ac3_max_msb_abs_int16   Ronald S. Bultje
• [libav-devel] [PATCH] fate: use standard diff options   Diego Biurrun
• [libav-devel] [PATCH] vf_yadif: Tolerate pts rollover.   Nicolas George
• [libav-devel] [PATCH] fate: use diff -b in oneline comparison   Mans Rullgard
• [libav-devel] [PATCH] fate: use diff -b in oneline comparison   Janne Grunau
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] [PATCH] lavf: add mdec to is_intra_only() list   Mans Rullgard
• [libav-devel] [PATCH] lavf: add mdec to is_intra_only() list   Kostya Shishkov
• [libav-devel] [PATCH] fate: Drop "oneline" test type in favor of standard reference files.   Diego Biurrun
• [libav-devel] [PATCH] fate: Drop "oneline" test type in favor of standard reference files.   Måns Rullgård
• [libav-devel] [PATCH] fate: Drop "oneline" test type in favor of standard reference files.   Diego Biurrun
• [libav-devel] [PATCH v2] fate: convert psx-str to a demuxer test   Mans Rullgard
• [libav-devel] [PATCH] fate: use diff -b in oneline comparison   Diego Biurrun
• [libav-devel] [PATCH] fate: use diff -b in oneline comparison   Kostya Shishkov
• [libav-devel] IGMP v3   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert psx-str to a demuxer test   Luca Barbato
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Diego Biurrun
• [libav-devel] [PATCH] fate: use diff -b in oneline comparison   Diego Biurrun
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Måns Rullgård
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Diego Biurrun
• [libav-devel] [PATCH] avfilter: Move ff_get_ref_perms_string() to where it is used.   Diego Biurrun
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Ronald S. Bultje
• [libav-devel] [PATCH 1/4] indeo3: ensure that decoded cell data is in 7-bit range as presumed by decoder   Ronald S. Bultje
• [libav-devel] [PATCH 2/4] indeo3: initialise pixel planes on allocation   Ronald S. Bultje
• [libav-devel] [PATCH] avfilter: Move ff_get_ref_perms_string() to where it is used.   Luca Barbato
• [libav-devel] [PATCH] tta: Fix comment.   Aneesh Dogra
• [libav-devel] [PATCH] tta: Fix comment.   Diego Biurrun
• [libav-devel] [PATCH v2] fate: convert psx-str to a demuxer test   Vitor Sessak
• [libav-devel] [PATCH 1/2] fate: Set FUZZ factor of (e)ac3-encode test to 3.   Diego Biurrun
• [libav-devel] [PATCH 2/2] fate: Set FUZZ factor of vorbis-13 test to 2.   Diego Biurrun
• [libav-devel] [PATCH v2] fate: convert psx-str to a demuxer test   Måns Rullgård
• [libav-devel] [PATCH 1/2] fate: Set FUZZ factor of (e)ac3-encode test to 3.   Luca Barbato
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Diego Biurrun
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] IGMP v3   Martin Storsjö
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] IGMP v3   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert psx-str to a demuxer test   Vitor Sessak
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Justin Ruggles
• [libav-devel] [PATCH 3/3] lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs   Justin Ruggles
• [libav-devel] [PATCH] fate: use standard diff options   Sean McGovern
• [libav-devel] [PATCH] fate: use standard diff options   Måns Rullgård
• [libav-devel] [PATCH] fate: work around non-standard wc implementations   Mans Rullgard
• [libav-devel] [PATCH 05/12] rv40dsp x86: start implementing loop filtering   Ronald S. Bultje
• [libav-devel] [PATCH] pcmenc: set correct bitrate value   Mans Rullgard
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Ronald S. Bultje
• [libav-devel] [PATCH] pcmenc: set correct bitrate value   Mans Rullgard
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Jason Garrett-Glaser
• [libav-devel] [PATCH 5/5] x86: h264: Ensure that the cmov instruction is not issued on i586 processors.   Ronald S. Bultje
• [libav-devel] [PATCH] pcmenc: set correct bitrate value   Luca Barbato
• [libav-devel] [PATCH] fate: work around non-standard wc implementations   Luca Barbato
• [libav-devel] [PATCH] fate: work around non-standard wc implementations   Måns Rullgård
• [libav-devel] [PATCH] fate: work around non-standard wc implementations   Luca Barbato
• [libav-devel] [PATCH] rtmp: fix url parsing   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Martin Storsjö
• [libav-devel] [PATCH] rtmp: support connection parameters   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Diego Elio Pettenò
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Diego Elio Pettenò
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Martin Storsjö
• [libav-devel] [PATCH] fate: Work around non-standard wc implementations at more places   Martin Storsjö
• [libav-devel] [PATCH] rtmp: support connection parameters   Samuel Pitoiset
• [libav-devel] [PATCH] fate: Work around non-standard wc implementations at more places   Måns Rullgård
• [libav-devel] [PATCH 2/5] x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.   Christophe Gisquet
• [libav-devel] [PATCH] x86: h264: prevent yasm from issuing a i686 nopl instruction on i586 machines   Diego Biurrun
• [libav-devel] [PATCH] x86: h264: prevent yasm from issuing a i686 nopl instruction on i586 machines   Ronald S. Bultje
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Luca Barbato
• [libav-devel] [PATCH] doc: Replace some @file tags by more suitable markup.   Diego Biurrun
• [libav-devel] [PATCH] mp3: fix start band index for block type 2 in 8kHz audio   Kostya Shishkov
• [libav-devel] [PATCH] mp3: fix start band index for block type 2 in 8kHz audio   Sean McGovern
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Diego Elio Pettenò
• [libav-devel] [PATCH] mp3: fix start band index for block type 2 in 8kHz audio   Kostya Shishkov
• [libav-devel] [PATCH] rtmp: Don't assume path points to a string of nonzero length   Luca Barbato
• [libav-devel] [PATCH] doc: Replace some @file tags by more suitable markup.   Luca Barbato
• [libav-devel] [PATCH] avconv: fix behavior with -ss as an output option.   Anton Khirnov
• [libav-devel] [PATCH] avconv: fix behavior with -ss as an output option.   Luca Barbato
• [libav-devel] LinuxTag   Diego Biurrun
• [libav-devel] LinuxTag   Diego Elio Pettenò
• [libav-devel] [PATCH] avprobe: output json by default   Luca Barbato
• [libav-devel] LinuxTag   Mashiat Sarker Shakkhar
• [libav-devel] [PATCH 1/5] avconv: add support for audio in complex filtergraphs.   Anton Khirnov
• [libav-devel] [PATCH 2/5] lavfi: initialize pts to AV_NOPTS_VALUE when creating new buffer refs.   Anton Khirnov
• [libav-devel] [PATCH 3/5] lavfi: Add fps filter.   Anton Khirnov
• [libav-devel] [PATCH 4/5] mov: enable parsing for VC-1.   Anton Khirnov
• [libav-devel] [PATCH 5/5] avconv: replace -vsync cfr code with the fps filter.   Anton Khirnov
• [libav-devel] [PATCH] avprobe: output json by default   Måns Rullgård
• [libav-devel] [PATCH 1/3] fate: teach videogen/rotozoom to output a single raw video stream   Mans Rullgard
• [libav-devel] [PATCH 2/3] fate: allow tests to specify unit size for psnr comparison   Mans Rullgard
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Mans Rullgard
• [libav-devel] [PATCH] fate: remove unused code from regressions-funcs.sh   Mans Rullgard
• [libav-devel] [PATCH] fate: remove unused code from regressions-funcs.sh   Diego Biurrun
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Diego Biurrun
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Måns Rullgård
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Måns Rullgård
• [libav-devel] [PATCH] configure: add --enable/disable-random option   Diego Biurrun
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Måns Rullgård
• [libav-devel] [PATCH 2/3] fate: allow tests to specify unit size for psnr comparison   Diego Biurrun
• [libav-devel] [PATCH v2] configure: add --enable/disable-random option   Mans Rullgard
• [libav-devel] [PATCH 1/3] fate: teach videogen/rotozoom to output a single raw video stream   Luca Barbato
• [libav-devel] [PATCH 1/2] fate: Fix warning that is printed when SAMPLES is unset for tests requiring it.   Diego Biurrun
• [libav-devel] [PATCH 2/2] fate: Make sure avprobe tests are not run if SAMPLES is unset.   Diego Biurrun
• [libav-devel] [PATCH v2] configure: add --enable/disable-random option   Diego Biurrun
• [libav-devel] [PATCH 1/2] fate: Fix warning that is printed when SAMPLES is unset for tests requiring it.   Måns Rullgård
• [libav-devel] [PATCH 2/2] fate: Make sure avprobe tests are not run if SAMPLES is unset.   Måns Rullgård
• [libav-devel] [PATCH 1/2] fate: Fix warning that is printed when SAMPLES is unset for tests requiring it.   Diego Biurrun
• [libav-devel] [PATCH 1/2] fate: Fix warning that is printed when SAMPLES is unset for tests requiring it.   Måns Rullgård
• [libav-devel] [PATCH 1/2] fate: Fix warning that is printed when SAMPLES is unset for tests requiring it.   Måns Rullgård
• [libav-devel] [PATCH 1/2] fate: remove unnecessary libavfilter dependency   Mans Rullgard
• [libav-devel] [PATCH 2/2] fate: fix dependencies on SAMPLES being set   Mans Rullgard
• [libav-devel] [PATCH 1/5] avconv: add support for audio in complex filtergraphs.   Luca Barbato
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Diego Biurrun
• [libav-devel] [PATCH 2/2] fate: fix dependencies on SAMPLES being set   Luca Barbato
• [libav-devel] [PATCH 1/2] fate: remove unnecessary libavfilter dependency   Luca Barbato
• [libav-devel] [PATCH 4/5] mov: enable parsing for VC-1.   Martin Storsjö
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH 1/2] fate: remove unnecessary libavfilter dependency   Diego Biurrun
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Diego Biurrun
• [libav-devel] [PATCH 2/2] fate: fix dependencies on SAMPLES being set   Diego Biurrun
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Diego Biurrun
• [libav-devel] [PATCH 3/3] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [PATCH v2] configure: add --enable/disable-random option   Janne Grunau
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Janne Grunau
• [libav-devel] [PATCH 0/7] avconv: support XDG specifications for presets   Diego Elio Pettenò
• [libav-devel] [PATCH 1/7] avconv/cmdutils: improve generation of search path for preset files.   Diego Elio Pettenò
• [libav-devel] [PATCH 2/7] avconv/cmdutils: return as soon as we found a viable preset file.   Diego Elio Pettenò
• [libav-devel] [PATCH 3/7] avconv: factor out per-path probing of presets.   Diego Elio Pettenò
• [libav-devel] [PATCH 4/7] avconv: inline testing of possible paths, instead of using a table.   Diego Elio Pettenò
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 6/7] avconv: support XDG_DATA_DIRS variable and default.   Diego Elio Pettenò
• [libav-devel] [PATCH 7/7] avconv: make sure that snprintf() had enough space to print the path.   Diego Elio Pettenò
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Diego Biurrun
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Luca Barbato
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Luca Barbato
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 0/7] avconv: support XDG specifications for presets   Diego Elio Pettenò
• [libav-devel] [PATCH v2] configure: add --enable/disable-random option   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Luca Barbato
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Luca Barbato
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Måns Rullgård
• [libav-devel] [PATCH 5/7] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Elio Pettenò
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Luca Barbato
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Elio Pettenò
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Måns Rullgård
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Måns Rullgård
• [libav-devel] [PATCH 1/7] avconv/cmdutils: improve generation of search path for preset files.   Luca Barbato
• [libav-devel] [PATCH 2/7] avconv/cmdutils: return as soon as we found a viable preset file.   Luca Barbato
• [libav-devel] [PATCH 3/7] avconv: factor out per-path probing of presets.   Luca Barbato
• [libav-devel] [PATCH 7/7] avconv: make sure that snprintf() had enough space to print the path.   Luca Barbato
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Elio Pettenò
• [libav-devel] [PATCH 6/7] avconv: support XDG_DATA_DIRS variable and default.   Luca Barbato
• [libav-devel] [PATCH 6/7] avconv: support XDG_DATA_DIRS variable and default.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 1/8] avconv/cmdutils: improve generation of search path for preset files.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 2/8] avconv/cmdutils: return as soon as we found a viable preset file.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 3/8] avconv: factor out per-path probing of presets.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 4/8] avconv: inline testing of possible paths, instead of using a table.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 5/8] avconv: search FreeDesktop user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 6/8] avconv: support XDG_DATA_DIRS variable and default.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 7/8] avconv: make sure that snprintf() had enough space to print the path.   Diego Elio Pettenò
• [libav-devel] [PATCH v2 8/8] avconv: allocate dynamic buffers of the correct size.   Diego Elio Pettenò
• [libav-devel] [PATCH 7/7] avconv: make sure that snprintf() had enough space to print the path.   Diego Elio Pettenò
• [libav-devel] [PATCH v3] avconv: search Freedesktop.org user data directories.   Diego Elio Pettenò
• [libav-devel] [PATCH v3] avconv: support XDG_DATA_DIRS variable and default.   Diego Elio Pettenò
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Biurrun
• [libav-devel] [PATCH] avprobe: output proper INI or JSON   Luca Barbato
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Jordi Ortiz
• [libav-devel] [PATCH 2/2] dwt.h: Cosmetics. uncrustify tool + limit linewidth to 80   Jordi Ortiz
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Måns Rullgård
• [libav-devel] [PATCH v2] fate: fix dependencies on SAMPLES being set   Mans Rullgard
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Janne Grunau
• [libav-devel] [PATCH v2] fate: fix dependencies on SAMPLES being set   Diego Biurrun
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Diego Biurrun
• [libav-devel] [PATCH] fate: document TARGET_EXEC and its usage   Diego Biurrun
• [libav-devel] [RFC] [PATCH] avcodec/utils: cast a function argument to shut up a compiler warning   Diego Biurrun
• [libav-devel] [PATCH] bugreports: Adjust gdb commands for newer gdb versions.   Janne Grunau
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Biurrun
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Måns Rullgård
• [libav-devel] [PATCH 1/6] factor out common decoding code for Indeo 4 and Indeo 5   Kostya Shishkov
• [libav-devel] [PATCH 2/6] indeo: check custom Huffman tables for errors   Kostya Shishkov
• [libav-devel] [PATCH 3/6] indeo: track tile macroblock size   Kostya Shishkov
• [libav-devel] [PATCH 4/6] indeo: clear allocated band buffers   Kostya Shishkov
• [libav-devel] [PATCH 5/6] indeo: check that band output buffer exists   Kostya Shishkov
• [libav-devel] [PATCH 6/6] indeo: check for invalid motion vectors   Kostya Shishkov
• [libav-devel] [PATCH] mp3: fix start band index for block type 2 in 8kHz audio   Kostya Shishkov
• [libav-devel] [PATCH] mp3: fix start band index for block type 2 in 8kHz audio   Ronald S. Bultje
• [libav-devel] [PATCH 1/2] indeo: Drop unused debug function ivi_check_band().   Diego Biurrun
• [libav-devel] [PATCH 2/2] indeo: Add missing ff_ prefix to ivi_calc_band_checksum().   Diego Biurrun
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Diego Biurrun
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Diego Biurrun
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Måns Rullgård
• [libav-devel] [PATCH] Add GNU Emacs 23 .dir-locals.el file   Måns Rullgård
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Diego Biurrun
• [libav-devel] [PATCH 2/2] indeo: Add missing ff_ prefix to ivi_calc_band_checksum().   Diego Biurrun
• [libav-devel] [PATCH] indeo: Add missing ff_ prefix to ivi_calc_band_checksum().   Diego Biurrun
• [libav-devel] [PATCH 09/12] truemotion1: remove disabled code   Diego Biurrun
• [libav-devel] [PATCH 06/12] ratecontrol: remove disabled code   Diego Biurrun
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Måns Rullgård
• [libav-devel] [PATCH 1/2] indeo: Drop unused debug function ivi_check_band().   Kostya Shishkov
• [libav-devel] [PATCH 09/12] truemotion1: remove disabled code   Kostya Shishkov
• [libav-devel] [PATCH] lavf: change some (de)muxer names to lowercase   Mans Rullgard
• [libav-devel] [PATCH] lavf: change some (de)muxer names to lowercase   Justin Ruggles
• [libav-devel] [PATCH] lavf: make output format matching case insensitive   Mans Rullgard
• [libav-devel] [PATCH] lavf: make output format matching case insensitive   Diego Elio Pettenò
• [libav-devel] [PATCH] avprobe: output proper INI or JSON   Diego Elio Pettenò
• [libav-devel] [PATCH] avprobe: output proper INI or JSON   Luca Barbato
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Luca Barbato
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Jordi Ortiz
• [libav-devel] [PATCH] avprobe: output proper INI or JSON   Måns Rullgård
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Måns Rullgård
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 2/2] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH 6/6] indeo: check for invalid motion vectors   Luca Barbato
• [libav-devel] [PATCH 5/6] indeo: check that band output buffer exists   Luca Barbato
• [libav-devel] [PATCH 4/6] indeo: clear allocated band buffers   Luca Barbato
• [libav-devel] [PATCH 3/6] indeo: track tile macroblock size   Luca Barbato
• [libav-devel] [PATCH 2/6] indeo: check custom Huffman tables for errors   Luca Barbato
• [libav-devel] [PATCH 1/6] factor out common decoding code for Indeo 4 and Indeo 5   Luca Barbato
• [libav-devel] [RFC] [PATCH] avcodec/utils: cast a function argument to shut up a compiler warning   Luca Barbato
• [libav-devel] [PATCH] Dirac: add Comments and references to the standard   Jordi Ortiz
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Jordi Ortiz
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Måns Rullgård
• [libav-devel] [PATCH] rtmp: fix url parsing   Luca Barbato
• [libav-devel] [PATCH] rtmp: fix url parsing   Martin Storsjö
• [libav-devel] [PATCH] fate: fix dependencies for non-SAMPLES avconv tests   Mans Rullgard
• [libav-devel] [PATCH] fate: teach videogen/rotozoom to output a single raw video stream   Mans Rullgard
• [libav-devel] [PATCH] fate: fix dependencies for non-SAMPLES avconv tests   Luca Barbato
• [libav-devel] [PATCH] fate: teach videogen/rotozoom to output a single raw video stream   Luca Barbato
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 2/2] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH 1/6] factor out common decoding code for Indeo 4 and Indeo 5   Kostya Shishkov
• [libav-devel] [PATCH] fate: teach videogen/rotozoom to output a single raw video stream   Måns Rullgård
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Måns Rullgård
• [libav-devel] [PATCH] fix typo in comment   Kostya Shishkov
• [libav-devel] [PATCH] fix typo in comment   Måns Rullgård
• [libav-devel] [PATCH] fate: cosmetics: Replace '_' by '-' in test names for consistency.   Diego Biurrun
• [libav-devel] [PATCH] indeo: Drop unused debug functions ivi_check_band/ivi_calc_band_checksum.   Diego Biurrun
• [libav-devel] [PATCH] Dirac: add Comments and references to the standard   Diego Biurrun
• [libav-devel] [PATCH] indeo: Drop unused debug functions ivi_check_band/ivi_calc_band_checksum.   Kostya Shishkov
• [libav-devel] [PATCH] indeo: Make ivi_calc_band_checksum() static, it is only used in one file.   Diego Biurrun
• [libav-devel] [PATCH] indeo: Make ivi_calc_band_checksum() static, it is only used in one file.   Kostya Shishkov
• [libav-devel] [PATCH] http: Factorize the code by adding http_read_header().   Samuel Pitoiset
• [libav-devel] [PATCH] http: Factorize the code by adding http_read_header().   Martin Storsjö
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Diego Biurrun
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Diego Biurrun
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH] http: Factorize the code by adding http_read_header().   Luca Barbato
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Luca Barbato
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] [PATCH] http: Factorize the code by adding http_read_header().   Martin Storsjö
• [libav-devel] [PATCH 1/3] tcp: Close connections by adding ffurl_shutdown() to URLProtocol.   Samuel Pitoiset
• [libav-devel] [PATCH 2/3] http: Add http_shutdown() and close the write direction.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] http: Add support for reading http POST reply headers.   Samuel Pitoiset
• [libav-devel] [PATCH] fate: cosmetics: Replace '_' by '-' in test names for consistency.   Måns Rullgård
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Måns Rullgård
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Måns Rullgård
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Måns Rullgård
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Diego Biurrun
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Måns Rullgård
• [libav-devel] [PATCH 1/3] tcp: Close connections by adding ffurl_shutdown() to URLProtocol.   Luca Barbato
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Luca Barbato
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Måns Rullgård
• [libav-devel] [PATCH 1/3] tcp: Close connections by adding ffurl_shutdown() to URLProtocol.   Martin Storsjö
• [libav-devel] [PATCH 2/3] http: Add http_shutdown() and close the write direction.   Martin Storsjö
• [libav-devel] [PATCH 3/3] http: Add support for reading http POST reply headers.   Martin Storsjö
• [libav-devel] [PATCH 1/2] fate: Allow input-file specific options in all commands invoked by do_lavf().   Diego Biurrun
• [libav-devel] [PATCH 2/2] fate: Hardcode the native NUT muxer/demuxer in the NUT regression test.   Diego Biurrun
• [libav-devel] [PATCH] fate: Hardcode the native NUT muxer/demuxer in the NUT regression test.   Diego Biurrun
• [libav-devel] [PATCH] fate: Hardcode the native NUT muxer/demuxer in the NUT regression test.   Måns Rullgård
• [libav-devel] [PATCH] fate: Hardcode the native NUT muxer/demuxer in the NUT regression test.   Ronald S. Bultje
• [libav-devel] [PATCH] Remove libnut wrapper.   Diego Biurrun
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Diego Biurrun
• [libav-devel] [PATCH] Remove libnut wrapper.   Måns Rullgård
• [libav-devel] [PATCH] fate: change name of FATE samples location environment variable   Måns Rullgård
• [libav-devel] [PATCH] Remove libnut wrapper.   Luca Barbato
• [libav-devel] [PATCH] fate: Hardcode the native NUT muxer/demuxer in the NUT regression test.   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Mans Rullgard
• [libav-devel] [PATCH 1/2] avformat: Add a flag to mark muxers that allow (non strict) monotone timestamps.   Justin Ruggles
• [libav-devel] [PATCH] ppc: Drop unused header regs.h   Diego Biurrun
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Janne Grunau
• [libav-devel] [PATCH 1/2] dwt.c: Cosmetics. uncrustify tool + limit linewidth to 80   Diego Biurrun
• [libav-devel] [PATCH 1/4] avio: Add a function for signalling end of reading/writing.   Samuel Pitoiset
• [libav-devel] [PATCH 2/4] tcp: Allow signalling end of reading/writing.   Samuel Pitoiset
• [libav-devel] [PATCH 3/4] http: Add http_shutdown() for ending writing of posts.   Samuel Pitoiset
• [libav-devel] [PATCH 4/4] http: Add support for reading http POST reply headers.   Samuel Pitoiset
• [libav-devel] [PATCH] ppc: Drop unused header regs.h   Janne Grunau
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Diego Biurrun
• [libav-devel] [PATCH 1/4] avio: Add a function for signalling end of reading/writing.   Martin Storsjö
• [libav-devel] [PATCH 2/4] tcp: Allow signalling end of reading/writing.   Martin Storsjö
• [libav-devel] [PATCH 3/4] http: Add http_shutdown() for ending writing of posts.   Martin Storsjö
• [libav-devel] [PATCH 4/4] http: Add support for reading http POST reply headers.   Martin Storsjö
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Janne Grunau
• [libav-devel] [PATCH 4/4] http: Add support for reading http POST reply headers.   Samuel Pitoiset
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [PATCH 4/4] http: Add support for reading http POST reply headers.   Martin Storsjö
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Måns Rullgård
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Måns Rullgård
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Diego Biurrun
• [libav-devel] [PATCH] doc: git: Add checklist with test steps to perform before pushing.   Diego Biurrun
• [libav-devel] [PATCH v3] fate: convert codec-regression.sh to makefile rules   Mans Rullgard
• [libav-devel] [PATCH v3] fate: convert codec-regression.sh to makefile rules   Diego Biurrun
• [libav-devel] [RFC] Add a float DSP framework to libavutil   Justin Ruggles
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Anton Khirnov
• [libav-devel] [RFC] Add a float DSP framework to libavutil   Diego Biurrun
• [libav-devel] [PATCH 1/7] lavfi: deprecate default config_props() callback and refactor avfilter_config_links()   Anton Khirnov
• [libav-devel] [PATCH 2/7] avconv: rename transcode_audio/video to decode_audio/video.   Anton Khirnov
• [libav-devel] [PATCH 3/7] avfiltergraph: smarter sample format selection.   Anton Khirnov
• [libav-devel] [PATCH 4/7] lavfi: remove avfilter_default_* from public API on next bump.   Anton Khirnov
• [libav-devel] [PATCH 5/7] lavfi: remove avfilter_null_* from public API on next bump.   Anton Khirnov
• [libav-devel] [PATCH 6/7] lavfi: fix incorrect comment.   Anton Khirnov
• [libav-devel] [PATCH 7/7] lavfi: fix comment, audio is supported now.   Anton Khirnov
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Justin Ruggles
• [libav-devel] [PATCH 2/2] lavfi: add an audio split filter   Justin Ruggles
• [libav-devel] [PATCH 6/7] lavfi: fix incorrect comment.   Justin Ruggles
• [libav-devel] [PATCH 7/7] lavfi: fix comment, audio is supported now.   Justin Ruggles
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Anton Khirnov
• [libav-devel] [PATCH 2/7] avconv: rename transcode_audio/video to decode_audio/video.   Justin Ruggles
• [libav-devel] [PATCH 2/2] lavfi: add an audio split filter   Anton Khirnov
• [libav-devel] [PATCH 3/7] avfiltergraph: smarter sample format selection.   Justin Ruggles
• [libav-devel] [PATCH 4/7] lavfi: remove avfilter_default_* from public API on next bump.   Justin Ruggles
• [libav-devel] [PATCH 5/7] lavfi: remove avfilter_null_* from public API on next bump.   Justin Ruggles
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Derek Buitenhuis
• [libav-devel] [PATCH 2/2] lavfi: add an audio split filter   Justin Ruggles
• [libav-devel] [PATCH 2/2] lavfi: add an audio split filter   Anton Khirnov
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Anton Khirnov
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Derek Buitenhuis
• [libav-devel] [PATCH 1/2] lavfi: rename vf_split.c to split.c   Anton Khirnov
• [libav-devel] [PATCH] af_resample: remove an extra space in the log output   Justin Ruggles
• [libav-devel] [PATCH] af_resample: remove an extra space in the log output   Justin Ruggles
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Diego Elio Pettenò
• [libav-devel] [PATCH] af_resample: remove an extra space in the log output   Janne Grunau
• [libav-devel] [PATCH] dwt.c: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt.c: Check mallocs   Luca Barbato
• [libav-devel] [PATCH] dwt.c: Check mallocs   Diego Biurrun
• [libav-devel] [PATCH] lavc: Add a 3DNow! version of vector_fmul()   Justin Ruggles
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH 1/3] ARM: Move arm.S from libavcodec to libavutil   Justin Ruggles
• [libav-devel] [PATCH 2/3] PPC: Move types_altivec.h and util_altivec.h from libavcodec to libavutil   Justin Ruggles
• [libav-devel] [PATCH 3/3] Add a float DSP framework to libavutil   Justin Ruggles
• [libav-devel] [PATCH] vf_yadif: Fix potential access violation.   Robert Nagy
• [libav-devel] [PATCH 1/3] ARM: Move arm.S from libavcodec to libavutil   Måns Rullgård
• [libav-devel] [PATCH] vf_yadif: Fix potential access violation.   Luca Barbato
• [libav-devel] [PATCH] dwt: Check mallocs   Diego Biurrun
• [libav-devel] [PATCH] vf_yadif: Fix potential access violation.   Robert Nagy
• [libav-devel] [PATCH 3/3] Add a float DSP framework to libavutil   Måns Rullgård
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 2/2] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH 3/3] Add a float DSP framework to libavutil   Justin Ruggles
• [libav-devel] [PATCH] lavc: x86: use %if HAVE_AVX guards around AVX functions in yasm code.   Justin Ruggles
• [libav-devel] [PATCH] lavc: x86: use %if HAVE_AVX guards around AVX functions in yasm code.   Luca Barbato
• [libav-devel] [PATCH 2/3] PPC: Move types_altivec.h and util_altivec.h from libavcodec to libavutil   Luca Barbato
• [libav-devel] [PATCH] dwt: Check mallocs   Martin Storsjö
• [libav-devel] [PATCH] lavfi: add audio mix filter   Justin Ruggles
• [libav-devel] [PATCH] avfiltergraph: smarter sample format selection.   Anton Khirnov
• [libav-devel] [PATCH] lavfi: add audio mix filter   Anton Khirnov
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Anton Khirnov
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt: Check mallocs   Martin Storsjö
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Diego Biurrun
• [libav-devel] [PATCH] build: Drop duplicates from OBJDIRS list during list creation   Diego Biurrun
• [libav-devel] [PATCH] index: announce LinuxTag 2012 booth   Diego Biurrun
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt: Check mallocs   Diego Biurrun
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] index: announce LinuxTag 2012 booth   Kostya Shishkov
• [libav-devel] [PATCH] dwt: Check mallocs   Diego Biurrun
• [libav-devel] [PATCH] dwt: Check mallocs   Diego Biurrun
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [PATCH] dwt: Check mallocs   Jordi Ortiz
• [libav-devel] [libav-commits] dwt: check malloc calls   Clément Bœsch
• [libav-devel] [PATCH] dwt: return errors from ff_slice_buffer_init()   Diego Biurrun
• [libav-devel] [PATCH] dwt: return errors from ff_slice_buffer_init()   Kostya Shishkov
• [libav-devel] [PATCH] dwt: return errors from ff_slice_buffer_init()   Jordi Ortiz
• [libav-devel] [PATCH] avfiltergraph: smarter sample format selection.   Anton Khirnov
• [libav-devel] [PATCH] vf_yadif: Fix potential access violation.   Anton Khirnov
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Diego Biurrun
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] rtmp: check malloc calls   Samuel Pitoiset
• [libav-devel] [PATCH] index: announce LinuxTag 2012 booth   Diego Biurrun
• [libav-devel] [PATCH 1/4] avio: Add a function for signalling end of reading/writing.   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] rtmp: check malloc calls   Diego Biurrun
• [libav-devel] [PATCH] imc: some cosmetics   Kostya Shishkov
• [libav-devel] [PATCH] imc: some cosmetics   Luca Barbato
• [libav-devel] [PATCH] imc: some cosmetics   Diego Biurrun
• [libav-devel] [PATCH] asyncts: reset delta to 0 when it's not used.   Anton Khirnov
• [libav-devel] [PATCH] asyncts: reset delta to 0 when it's not used.   Luca Barbato
• [libav-devel] [PATCH] asyncts: reset delta to 0 when it's not used.   Justin Ruggles
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Diego Biurrun
• [libav-devel] [PATCH 1/7] lavfi: deprecate default config_props() callback and refactor avfilter_config_links()   Justin Ruggles
• [libav-devel] [PATCH 1/4] avio: Add a function for signalling end of reading/writing.   Martin Storsjö
• [libav-devel] [PATCH 2/4] tcp: Allow signalling end of reading/writing.   Martin Storsjö
• [libav-devel] [PATCH 3/4] http: Add http_shutdown() for ending writing of posts.   Martin Storsjö
• [libav-devel] [PATCH 4/4] http: Add support for reading http POST reply headers.   Martin Storsjö
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Martin Storsjö
• [libav-devel] [PATCH 2/2] rtmp: check malloc calls   Martin Storsjö
• [libav-devel] [PATCH] aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.   Alex Converse
• [libav-devel] [PATCH] Define SHUT_RD, SHUT_WR and SHUT_RDWR on OS/2   Luca Barbato
• [libav-devel] [PATCH] Define SHUT_RD, SHUT_WR and SHUT_RDWR on OS/2   Martin Storsjö
• [libav-devel] [PATCH 1/2] adpcm: Fix crash with broken, non-stereo samples   Reinhard Tartler
• [libav-devel] [PATCH 2/2] tqi: Pass errors from the MB decoder   Reinhard Tartler
• [libav-devel] [PATCH 1/2] adpcm: Fix crash with broken, non-stereo samples   Justin Ruggles
• [libav-devel] [PATCH 1/2] adpcm: Fix crash with broken, non-stereo samples   Reinhard Tartler
• [libav-devel] [PATCH 2/2] tqi: Pass errors from the MB decoder   Justin Ruggles
• [libav-devel] [PATCH 2/2] tqi: Pass errors from the MB decoder   Reinhard Tartler
• [libav-devel] [PATCH] flvdec: Make sure sample_rate is set to the updated value   Martin Storsjö
• [libav-devel] [PATCH 2/3] rtmp: check malloc calls   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] rtmp: Return I/O error when we can't perform handshake.   Samuel Pitoiset
• [libav-devel] [PATCH] imc: some cosmetics   Kostya Shishkov
• [libav-devel] [PATCH] flvdec: Make sure sample_rate is set to the updated value   Luca Barbato
• [libav-devel] [PATCH] imc: some cosmetics   Luca Barbato
• [libav-devel] [PATCH 2/3] rtmp: check malloc calls   Luca Barbato
• [libav-devel] [PATCH] movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.   Alex Converse
• [libav-devel] [PATCH] movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.   Alex Converse
• [libav-devel] [PATCH 3/3] rtmp: Return I/O error when we can't perform handshake.   Luca Barbato
• [libav-devel] [PATCH] movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.   Justin Ruggles
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Samuel Pitoiset
• [libav-devel] [PATCH] Define SHUT_RD, SHUT_WR and SHUT_RDWR on OS/2   Dave Yeo
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Martin Storsjö
• [libav-devel] [PATCH 1/3] rtmp: check ff_rtmp_packet_create calls.   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] rtmp: check ff_rtmp_packet_create calls.   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: WIP: check retcodes of net IO operations   Andrey Utkin
• [libav-devel] [PATCH] configure: x86: Check if Assembler can cope with "CPU" macro.   Dave Yeo
• [libav-devel] [PATCH] rtmp: WIP: check retcodes of net IO operations   Martin Storsjö
• [libav-devel] [PATCH] rtmp: WIP: check retcodes of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH 1/3] rtmp: check ff_rtmp_packet_create calls.   Martin Storsjö
• [libav-devel] [PATCH 1/3] rtmp: check ff_rtmp_packet_create calls.   Martin Storsjö
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Martin Storsjö
• [libav-devel] [PATCH] Define SHUT_RD, SHUT_WR and SHUT_RDWR on OS/2   Dave Yeo
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Andrey Utkin
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH] rtmp: Check return codes of net IO operations   Martin Storsjö
• [libav-devel] [PATCH 1/2] rtmp: Check return codes of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] rtmp: Pass the proper return code in rtmp_handshake   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] rtmp: Check return codes of net IO operations   Martin Storsjö
• [libav-devel] [PATCH 2/2] rtmp: Pass the proper return code in rtmp_handshake   Martin Storsjö
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] Convert a video   Bernhard Pöchtrager
• [libav-devel] [PATCH] imc: some cosmetics   Diego Biurrun
• [libav-devel] [PATCH] opt: Add av_opt_set_bin(), a new function which sets binary data via AVOptions   Samuel Pitoiset
• [libav-devel] [PATCH] opt: Add av_opt_set_bin(), a new function which sets binary data via AVOptions   Samuel Pitoiset
• [libav-devel] [PATCH] opt: Add av_opt_set_bin(), a new function which sets binary data via AVOptions   Luca Barbato
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Samuel Pitoiset
• [libav-devel] [PATCH] opt: Add av_opt_set_bin(), a new function which sets binary data via AVOptions   Samuel Pitoiset
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Martin Storsjö
• [libav-devel] IGMP v3   Martin Storsjö
• [libav-devel] [PATCH 1/2] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 2/2] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Justin Ruggles
• [libav-devel] [PATCH 3/3] lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs   Justin Ruggles
• [libav-devel] [PATCH 2/2] rtmp: Pass the proper return code in rtmp_handshake   Martin Storsjö
• [libav-devel] IGMP v3   Martin Storsjö
• [libav-devel] [PATCH] vp8: move block coeff arithcoder on stack.   Ronald S. Bultje
• [libav-devel] [PATCH] movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.   Alex Converse
• [libav-devel] [PATCH] movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.   Justin Ruggles
• [libav-devel] [PATCH] vp8: move block coeff arithcoder on stack.   Luca Barbato
• [libav-devel] Convert a video   Bernhard Pöchtrager
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Samuel Pitoiset
• [libav-devel] [PATCH] http: Add support for using persistent connections   Samuel Pitoiset
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Martin Storsjö
• [libav-devel] [PATCH] http: Add support for using persistent connections   Martin Storsjö
• [libav-devel] Convert a video   Anton Khirnov
• [libav-devel] [PATCH] avprobe: display the codec profile in show_stream()   Christian Schmidt
• [libav-devel] [PATCH] avprobe: display the codec profile in show_stream()   Benjamin Larsson
• [libav-devel] [PATCH] avprobe: display the codec profile in show_stream()   Luca Barbato
• [libav-devel] [PATCH] imc: some cosmetics   Kostya Shishkov
• [libav-devel] [PATCH] aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.   Alex Converse
• [libav-devel] [PATCH] aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.   Luca Barbato
• [libav-devel] [PATCH] cosmetics: Fix indentation   Martin Storsjö
• [libav-devel] [PATCH 1/3] avprobe: improve formatting   Luca Barbato
• [libav-devel] [PATCH 2/3] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 3/3] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH] cosmetics: Fix indentation   Luca Barbato
• [libav-devel] [PATCH 3/3] avprobe: provide JSON output   Anton Khirnov
• [libav-devel] [PATCH 1/5] avprobe: improve formatting   Luca Barbato
• [libav-devel] [PATCH 2/5] avprobe: output proper INI format   Luca Barbato
• [libav-devel] [PATCH 3/5] avprobe: provide JSON output   Luca Barbato
• [libav-devel] [PATCH 4/5] avprobe: update documentation   Luca Barbato
• [libav-devel] [PATCH 5/5] avprobe: changelog entry   Luca Barbato
• [libav-devel] [PATCH 1/3] rtpenc_chain: Free the URLContext on failure   Martin Storsjö
• [libav-devel] [PATCH 2/3] rtpenc_chain: Return an error code instead of just a plain pointer   Martin Storsjö
• [libav-devel] [PATCH 3/3] avconv: Display the error returned by avformat_write_header   Martin Storsjö
• [libav-devel] [PATCH] rtpenc: Expose the ssrc as an avoption   Martin Storsjö
• [libav-devel] [PATCH] avprobe: fix function prototype   Luca Barbato
• [libav-devel] [PATCH 3/3] avconv: Display the error returned by avformat_write_header   Luca Barbato
• [libav-devel] [PATCH 3/3] avconv: Display the error returned by avformat_write_header   Martin Storsjö
• [libav-devel] [PATCH 1/3] rtpenc_chain: Free the URLContext on failure   Luca Barbato
• [libav-devel] [PATCH] rtpenc: Expose the ssrc as an avoption   Luca Barbato
• [libav-devel] [PATCH 3/3] avconv: Display the error returned by avformat_write_header   Luca Barbato
• [libav-devel] [PATCH] avprobe: display the codec profile in show_stream()   Luca Barbato
• [libav-devel] [PATCH] avprobe: fix function prototype   Martin Storsjö
• [libav-devel] [PATCH] avprobe: fix function prototype   Luca Barbato
• [libav-devel] [PATCH] avprobe: fix function prototype   Martin Storsjö
• [libav-devel] [PATCH] avprobe: fix function prototype   Luca Barbato
• [libav-devel] [PATCH] avprobe: display the codec profile in show_stream()   Anton Khirnov
• [libav-devel] [PATCH] log: make colored output more colorful.   Anton Khirnov
• [libav-devel] [PATCH 1/2] avprobe: fix formatting.   Anton Khirnov
• [libav-devel] [PATCH 2/2] avprobe: restore pseudo-INI old style format for compatibility.   Anton Khirnov
• [libav-devel] [PATCH] log: make colored output more colorful.   Luca Barbato
• [libav-devel] [PATCH 1/2] avprobe: fix formatting.   Luca Barbato
• [libav-devel] [PATCH 2/2] avprobe: restore pseudo-INI old style format for compatibility.   Luca Barbato
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Samuel Pitoiset
• [libav-devel] [PATCH] rtsp: Check for dynamic payload handlers if no static payload mapping was found   Martin Storsjö
• [libav-devel] [PATCH] opt: Add AV_OPT_TYPE_INT32   Martin Storsjö
• [libav-devel] [PATCH] opt: add av_opt_set_bin()   Martin Storsjö
• [libav-devel] [PATCH 1/5] avconv: split configuring input filters out of configure_complex_filter   Anton Khirnov
• [libav-devel] [PATCH 2/5] avconv: merge configuration code for complex and simple filters   Anton Khirnov
• [libav-devel] [PATCH 3/5] avconv: don't print filters inserted by avconv in stream mappings.   Anton Khirnov
• [libav-devel] [PATCH 4/5] doc/avconv: expand documentation for the -s option.   Anton Khirnov
• [libav-devel] [PATCH 5/5] avconv: extend -r to work on any input stream.   Anton Khirnov
• [libav-devel] [PATCH] opt: Add AV_OPT_TYPE_INT32   Anton Khirnov
• [libav-devel] [PATCH 3/3] Add a float DSP framework to libavutil   Justin Ruggles
• [libav-devel] [PATCH] rtsp: Check for dynamic payload handlers if no static payload mapping was found   Luca Barbato
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Vitor Sessak
• [libav-devel] [PATCH] x86: Avoid movs on BUTTERFLYPS when in AVX mode   Vitor Sessak
• [libav-devel] [PATCH] x86: Avoid movs on BUTTERFLYPS when in AVX mode   Justin Ruggles
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Ronald S. Bultje
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Vitor Sessak
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Ronald S. Bultje
• [libav-devel] [PATCH] avprobe: move formatter functions in the context   Luca Barbato
• [libav-devel] [PATCH] cmdutils: update copyright year to 2012.   Sean McGovern
• [libav-devel] [PATCH] AVOptions: fix the value printed in out of range error message.   Anton Khirnov
• [libav-devel] [PATCH] AVOptions: fix the value printed in out of range error message.   Luca Barbato
• [libav-devel] IGMP v3   aviad rozenhek
• [libav-devel] [PATCH 1/2] rtmp: support connection parameters   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] doc: Add documentation for the newly added rtmp_* options.   Samuel Pitoiset
• [libav-devel] IGMP v3   Martin Storsjö
• [libav-devel] [PATCH 1/3] http: Add support for using persistent connections   Samuel Pitoiset
• [libav-devel] [PATCH 2/3] http: Add support for reusing the http socket for subsequent requests.   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data.   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] rtmp: support connection parameters   Martin Storsjö
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data.   Martin Storsjö
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data.   Samuel Pitoiset
• [libav-devel] [PATCH 1/3] http: Add support for using persistent connections   Martin Storsjö
• [libav-devel] [PATCH 2/3] http: Add support for reusing the http socket for subsequent requests.   Martin Storsjö
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data.   Martin Storsjö
• [libav-devel] [PATCH 1/3] http: Add support for using persistent connections   Samuel Pitoiset
• [libav-devel] [PATCH 2/3] http: Add support for reusing the http socket for subsequent requests   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH 3/3] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH 2/3] http: Add support for reusing the http socket for subsequent requests   Martin Storsjö
• [libav-devel] [PATCH 1/5] avconv: split configuring input filters out of configure_complex_filter   Anton Khirnov
• [libav-devel] [PATCH 1/5] avconv: split configuring input filters out of configure_complex_filter   Justin Ruggles
• [libav-devel] [PATCH 3/5] avconv: don't print filters inserted by avconv in stream mappings.   Justin Ruggles
• [libav-devel] [PATCH 4/5] doc/avconv: expand documentation for the -s option.   Justin Ruggles
• [libav-devel] [PATCH 2/3] lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs   Ronald S. Bultje
• [libav-devel] [PATCH 3/3] lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs   Ronald S. Bultje
• [libav-devel] [PATCH 5/5] avconv: extend -r to work on any input stream.   Justin Ruggles
• [libav-devel] [PATCH] fate: fix acodec/vsynth tests for make 3.81   Mans Rullgard
• [libav-devel] [PATCH 1/2] fate-run: make avconv() properly deal with multiple inputs.   Anton Khirnov
• [libav-devel] [PATCH 2/2] FATE: add a test for amix audio filter.   Anton Khirnov
• [libav-devel] [PATCH] fate: fix acodec/vsynth tests for make 3.81   Janne Grunau
• [libav-devel] [PATCH 1/3] x86: use new schema for ASM macros   Janne Grunau
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Janne Grunau
• [libav-devel] [PATCH] x86: Avoid movs on BUTTERFLYPS when in AVX mode   Janne Grunau
• [libav-devel] [PATCH] LATM packetization support in MPEG-TS muxer   Jindřich Makovička
• [libav-devel] [PATCH] pcm_mpeg: fix number of consumed bytes to include the header.   Hendrik Leppkes
• [libav-devel] [PATCH] pcm_mpeg: fix number of consumed bytes to include the header.   Janne Grunau
• [libav-devel] [PATCH] LATM packetization support in MPEG-TS muxer   Martin Storsjö
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Anton Khirnov
• [libav-devel] [PATCH] LATM packetization support in MPEG-TS muxer   Jindřich Makovička
• [libav-devel] [PATCH 2/5] avconv: merge configuration code for complex and simple filters   Justin Ruggles
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Derek Buitenhuis
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Anton Khirnov
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Derek Buitenhuis
• [libav-devel] [PATCH 1/1] avfilter: include required header file avfilter.h in video.h   Ronald S. Bultje
• [libav-devel] [PATCH] XDCAM decoding support   Joseph Artsimovich
• [libav-devel] [PATCH] XDCAM decoding support   Derek Buitenhuis
• [libav-devel] [PATCH] avprobe: move formatter functions in the context   Ronald S. Bultje
• [libav-devel] [libav-commits] avprobe: move formatter functions in the context   Martin Storsjö
• [libav-devel] [PATCH] avprobe: correctly set the default formatter   Luca Barbato
• [libav-devel] [PATCH] avprobe: correctly set the default formatter   Martin Storsjö
• [libav-devel] [PATCH 1/2] lavr: add x86-optimized functions for mixing 1-to-2 fltp with flt coeffs   Justin Ruggles
• [libav-devel] [PATCH 2/2] lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs   Justin Ruggles
• [libav-devel] [PATCH 2/2] lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs   Luca Barbato
• [libav-devel] [libav-commits] avprobe: move formatter functions in the context   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Sean McGovern
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Ronald S. Bultje
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Luca Barbato
• [libav-devel] [PATCH] fate: fix md5sum replacement on some systems   Mans Rullgard
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Mans Rullgard
• [libav-devel] [PATCH 2/2] mov: set AVCodecContext.width/height for h264   Mans Rullgard
• [libav-devel] [PATCH] fate: add missing $(TARGET_PATH) to ac3-fixed-encode   Mans Rullgard
• [libav-devel] [PATCH] fate: fix md5sum replacement on some systems   Luca Barbato
• [libav-devel] [PATCH] fate: add missing $(TARGET_PATH) to ac3-fixed-encode   Luca Barbato
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Luca Barbato
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Ronald S. Bultje
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Hendrik Leppkes
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Måns Rullgård
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Måns Rullgård
• [libav-devel] [PATCH] LATM packetization support in MPEG-TS muxer   Martin Storsjö
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] http: Pass the proper return code in http_connect   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] http: Pass the proper return code in http_connect   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH] XDCAM decoding support   Joseph Artsimovich
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH 1/6] avconv: don't use InputStream in the buffer management code.   Anton Khirnov
• [libav-devel] [PATCH 2/6] avtools: move buffer management code from avconv to cmdutils.   Anton Khirnov
• [libav-devel] [PATCH 3/6] avplay: use buffersrc instead of custom input filter.   Anton Khirnov
• [libav-devel] [PATCH 4/6] lavfi: make formats API private on next bump.   Anton Khirnov
• [libav-devel] [PATCH 5/6] lavfi: make avfilter_insert_pad and pals private on next bump.   Anton Khirnov
• [libav-devel] [PATCH 6/6] lavfi: remove request/poll and drawing functions from public API on next bump   Anton Khirnov
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH 2/2] http: Pass the proper return code in http_connect   Martin Storsjö
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] http: Pass the proper return code of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH 2/2] http: Pass the proper return code of net IO operations   Samuel Pitoiset
• [libav-devel] [PATCH 1/6] avconv: don't use InputStream in the buffer management code.   Janne Grunau
• [libav-devel] [PATCH 2/6] avtools: move buffer management code from avconv to cmdutils.   Janne Grunau
• [libav-devel] [PATCH 2/2] http: Pass the proper return code of net IO operations   Martin Storsjö
• [libav-devel] [PATCH] fate: Fix fate-ac3-fixed-encode for pre-ssse3 x86 machines   Martin Storsjö
• [libav-devel] [PATCH] libavcodec/pcm-mpeg.c: replace unsupported with reserved   Christian Schmidt
• [libav-devel] [PATCH] libavcodec/pcm-mpeg.c: replace unsupported with reserved   Kostya Shishkov
• [libav-devel] [PATCH] libavcodec/pcm-mpeg.c: replace unsupported with reserved   Christian Schmidt
• [libav-devel] [PATCH] libavcodec/pcm-mpeg.c: replace unsupported with reserved   Kostya Shishkov
• [libav-devel] [PATCH] fate: Fix fate-ac3-fixed-encode for pre-ssse3 x86 machines   Justin Ruggles
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Motofumi Oka
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Martin Storsjö
• [libav-devel] [PATCH 1/2] tcp: Check the return values from bind and accept   Martin Storsjö
• [libav-devel] [PATCH 2/2] tcp: Try enabling SO_REUSEADDR when listening   Martin Storsjö
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Motofumi Oka
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Martin Storsjö
• [libav-devel] [PATCH 4/6] lavfi: make formats API private on next bump.   Justin Ruggles
• [libav-devel] [PATCH 5/6] lavfi: make avfilter_insert_pad and pals private on next bump.   Justin Ruggles
• [libav-devel] [PATCH 6/6] lavfi: remove request/poll and drawing functions from public API on next bump   Justin Ruggles
• [libav-devel] [PATCH] lavfi: amix: check active input count before calling request_samples   Justin Ruggles
• [libav-devel] [PATCH] lavfi: amix: check active input count before calling request_samples   Luca Barbato
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Motofumi Oka
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Luca Barbato
• [libav-devel] [PATCH] lavf: Add function for accessing Matroska Codec <-> CodecID table   Derek Buitenhuis
• [libav-devel] [PATCH] lavf: Add function for accessing Matroska Codec <-> CodecID table   Luca Barbato
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Sean McGovern
• [libav-devel] [PATCH v2] fate: convert codec-regression.sh to makefile rules   Luca Barbato
• [libav-devel] [PATCH] lavf: Add function for accessing Matroska Codec <-> CodecID table   Derek Buitenhuis
• [libav-devel] [PATCH 2/2] http: Pass the proper return code of net IO operations   Martin Storsjö
• [libav-devel] [PATCH 1/2] http: Add 'post_data', a new option which sets custom HTTP post data   Martin Storsjö
• [libav-devel] [PATCH/RFC] movenc: Trim the audio codec delay using an edit list.   Alex Converse
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Sean McGovern
• [libav-devel] [PATCH] movenc: Write chan atom for all audio tracks in mov mode movies.   Alex Converse
• [libav-devel] [PATCH 1/2] h264: allow cropping to AVCodecContext.width/height   Måns Rullgård
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Måns Rullgård
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Sean McGovern
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Måns Rullgård
• [libav-devel] [RFC] Audio channel & channel layout macro names   Christian Schmidt
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Sean McGovern
• [libav-devel] [PATCH] fate: add CPPFLAGS to host programs   Luca Barbato
• [libav-devel] [PATCH] Announce 0.5.8 very very late   Derek Buitenhuis
• [libav-devel] [PATCH] movenc: Write chan atom for all audio tracks in mov mode movies.   Justin Ruggles
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Kostya Shishkov
• [libav-devel] [PATCH] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH] cmdutils.c: avoid converting filepath to UTF-8 for avisynth   Martin Storsjö
• [libav-devel] [PATCH] Announce 0.5.8 very very late   Ronald S. Bultje
• [libav-devel] [RFC] Audio channel & channel layout macro names   Justin Ruggles
• [libav-devel] [PATCH 1/4] flv: support stream text data as onTextData   Luca Barbato
• [libav-devel] [PATCH 2/4] flvenc: cleanup return values   Luca Barbato
• [libav-devel] [PATCH 3/4] flvenc: cosmetic   Luca Barbato
• [libav-devel] [PATCH 4/4] flvdec: cosmetic   Luca Barbato
• [libav-devel] [PATCH 1/2] tcp: Check the return values from bind and accept   Luca Barbato
• [libav-devel] [PATCH 2/2] tcp: Try enabling SO_REUSEADDR when listening   Luca Barbato

Last message date: Thu May 31 23:09:52 CEST 2012
Archived on: Thu May 31 23:09:39 CEST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...